Skip to main content

Course definition   

TARGETS 

  • Marketing function
  • Protection technician
  • Product Application Engineer (PAE)
  • Application engineer 

Objective:  

  • Able to understand and choose the protection functions available in the Sepam range offer in compliance with standards and industrial MV network applications. Theoretical introduction to Sepam series 20, 40, 80 bringing into operation.  

Content

  • Introduction of MV dist ibut ion networks, Generation, transmission and distribution systems, Substation, industrial and building environments, Typical loads and generators, The configuration of MV networks, faults, Neutral earthing systems. Introducing MV protection principles: The protection functions, The principles of discrimination, Measurement sensors. Study of an MV industrial network and use of the protection plan: Calculation/ verification of fault current, Choosing protection function according to the application (substation, busbar, transformer, etc …) 

PDF Files:00-Sepam Protection Principles.
01-Plan_Network structures.
02-Plan_Network and machine faults.
03-Plan_Source of Isc.
04-Plan_Symmetrical components.
05-Plan_Calculation of Isc.
06-Plan_Calculation of Isc_exercises.
07-Plan_Earthing systems.
08-Plan_Earthing systems_exercises.
09-Plan_CTs.
10-Plan_CTs_exercises.
11-Plan_Irsd measurement.
12-Plan_LPCT.
13-Plan_VTs.
14-Plan_Vrsd measurement.
15-Plan_Prot funct general charact.
16-Plan_IDMT curves_exercises.
17-Plan_Discrimination.
18-Plan_ANSI 67.
19-Plan_ANSI 67N.
20-Plan_Differential_87.
21-Plan_ANSI 87M.
22-Plan_ANSI 87T.
23-Plan_ANSI 64REF.
24-Plan_ANSI 49RMS.
25-Plan_Network protection.
26-Plan_Busbar protection.
27-Plan_Transformer protection.
28-Plan_ANSI 24_transformer.
29-Plan_ANSI 26-63.
30-Plan_Motor protection.
31-Plan_ANSI 40_motor.
32-Plan_ANSI 78PS_motor.
33-Plan_Synchronous generator protection.
34-Plan_ANSI 21B.
35-Plan_ANSI 24_generator.

To download: contact us 

22 Replies to “Course on: Sepam Protection Principles”

  1. avatar

    May I know price of above product?

    1. avatar

      Please check your email for details

      1. avatar

        Sir, I do not get any email sir from your side regarding the above matter.

        1. avatar

          pls check ur email for Course on : Sepam Protection Principles

      2. avatar

        NOT GET SOLUTION SIR. PL SHARE STUDY DOCUMENTS

        1. avatar

          plz text us on WhatsApp: +989129613659

      3. avatar

        Kindly advise the fee for sepam course materials and software
        shukhovu@gmail.com
        Regards

        1. avatar

          Do you want online, or pre-recorded training?

          Pre recorded ones are avabile on
          https://elec-engg.com/shop/

  2. avatar

    Hi Sir
    1- Is this course prepared by you or its a technical catalogues from the manufacture?
    2- can I pay with master card?

    1. avatar

      Please check your email, I have send course details to your email

  3. avatar

    Please share course price sir ..

  4. avatar

    can you send me the details of this course please

  5. avatar

    Please send me more information on this course

    1. avatar

      pls check ur email for more info about this training course

  6. avatar

    Could you please send the price of the course. the whole package

    1. avatar

      Yes, please check your email for all packages with a special offer
      DIGSI 4 (3 hrs)
      DIGSI 5 (7 hrs training)
      IEC 61850
      ETAP for protection Engr
      PSCAD for protection Engr
      ABB PCM 600

  7. avatar

    Please share above material

  8. avatar

    Please, can you share course?

    1. avatar

      txt us on our WhatsApp: +989129613659

  9. avatar

    hi ,
    may i know course fees for
    7SD – line differential
    RED615- Line differential
    Micom 543 – line diferential

    1. avatar

      txt us plz on whatsapp: +989129613659

  10. avatar

    Please i want sepam course