Skip to main content
  • Protection study
  • Review the protection concepts
  • Definition of different relays types
  • Definition of CT and PT
  • Apply protection settings
  • Check the relay’s static performance
  • Check the relay’s dynamic performance
  • Check the protective coordination
  • Drawing the relays curves
  • Describing graphic considerations
  • Reviewing the available relay models in the software library
  • Review protection toolbar and coordination tools
  • Executing multiple instances

Protection study Course Details:

  • Part 1 and part 2 (26 min): Review the protections capabilities; Graphical properties; Definition of relays and slots; Definition of CT and its details; Describe the protection modeling concept Model an overcurrent relay
  • Part 3 (10 min): Definition of PT and its details; Apply protection settings; Introduce DSL of relays Model a distance relay
  • Part 4 (4 min): Create a PSLD; Create a time-overcurrent plot; Create an R-X plot
  • Part 5 (17 min): Example of applying overcurrent relays on a radical system and their coordination
  • Part 6 (15 min): Continue overcurrent coordination; Change the relay setting in plots Time-overcurrent plot setting
  • Part 7 (23 min): Continue overcurrent coordination
  • Part 8 (7 min): Continue overcurrent coordination
  • Part 9 (16 min): Distance relay settings and coordination
  • Part 10 (19 min): Continue Distance relay settings and coordination
  • Part 11 (18 min): Continue Distance relay settings and coordination
  • Part 12 (21 min): Continue Distance relay settings and coordination
  • Part 13 (17 min): Study of the Over-voltage and under-voltage Protection Functions in DIgSILENT
  • Part 14 (16 min): Study of the over-frequency and under-frequency
  • Part 15 (14 min): Continue the over-frequency and under-frequency load shedding (UFLS) scheme
  • Part 16 (16 min): Directional overcurrent
  • Part 17 (14 min): Fuse

New parts will be recorded and will be added soon!


  • DPL
  • Reviewing objectives and capabilities of programming in the software studies
  • Introducing the DPL environment
  • Defining variables, constants, commands, functions, inputs, and outputs
  • Accessing to SLD equipment and data
  • Accessing software computational functions such as load-flow and short-circuit commands.
  • Calling a DPL command by another DPL
  • Reviewing the available DPLs in the software library
  • Executing multiple instances

  • Modal analysis
  • Reviewing the modal analysis of the concepts
  • performing modal analysis, different methods, and related settings
  • Checking the controllability, observability, and participation factors of the system
  • Creating different reports and plots
  • Graphic considerations
  • Executing multiple instances
  • Introduce methods to eliminate dynamic instability

  • Voltage stability study and capacitor placement
  • Reviewing the concepts of voltage stability
  • Reviewing assessment methods
  • Reviewing improvement tools
  • Drawing P-V and Q-V curves
  • Executing multiple instances

Enroll in the DIGSILENT Training Course – Advanced

supplementary Files attached to the course: To save your time, we’ve gathered important related files/ videos /software and attached them to the course as supplementary files.

  • DIGSILENT 2022 Technical References
  • DIgSILENT Relay Library

14 Replies to “Advanced DIGSILENT Training”

  1. avatar

    Hi
    ,i have purchased your dig-silent course, its a very good course ..i liked it….
    but .just like distance protection…. can differential relay settings & plot of low impedance graph can be done on DIGSILENT 15.1 version ? or it is only possible in digsilent 16 or higher versions..?

    if it can be done in digsilent 15.1 any procedure please share to my email below please

    thanks.

    1. avatar

      Hi, thanks for your feedback. Regarding your query, our support team will contact you on WhatsApp soon within 20 min

  2. avatar

    Hi
    how much does it cost ?

    1. avatar

      i’ll email you all details

  3. avatar

    Hi,
    can differential protection Relay settings be done on DIG-SILENT 15.1 version?

    Thank you

  4. avatar

    Hi,
    Can you give me more information about digisilent course
    How many courses available?

  5. avatar

    Hi ,
    I need some Information, about the digsilent traing course , Is both basic and advance digsilent course together in one module . I cannot see basic and advance digsilent in product selection, so if you can let me know does the disilent course covers both basic and advance course together.
    Thanks
    AN

    1. avatar

      Hi Ashwin,
      yes, both digsilent training courses, basic and advance digsilent courses together in one module.

  6. avatar

    hi,
    very good course, but next time include concepts like transient stability , cct , lightning study , switching of transformer , TRV, RRRV ,ct saturation , line charging , vfto ,ffto studies etc.

  7. avatar

    Hello Sir
    Please can i create differential plot on Digsilent 15.1.7, if yes please procedure, i need this for my school report, i try on Digsilent 15.1.7 but i just see overcurrent plot

    Cordially

    1. avatar

      Hello, no, it is better to simulate in the latest version digsilent 22 or digsilent 23

  8. avatar

    Hi,
    can differential protection Relay settings be done on DIG-SILENT 15.1 version?

    1. avatar

      Hi better to use Digsilent 22