Skip to main content

This technical report refers to the electrical protection of all 132kV switchgear. These settings may be re-evaluated during the commissioning, according to actual and measured values. Protection selectivity is partly considered in this report and could be also re-evaluated. The names of parameters in this calculation may differ from those in the appropriate device.

Technical Data of the Lines

Main Line
Conductor TypeACSR Lynx
Length27.8 km
TypeZM Type Tower
Positive sequence impedance 0.1583 + j0.4004 (0.431 ∠68.4°) Ω/ km
Zero sequence impedance0.3246 + j1.228 (1.27 ∠75.2°) Ω/ km
Current capacity (A)487
Next Line
Conductor TypeACSR Lynx
Length36 km
TypeZM Type Tower
Positive sequence impedance 0.1583 + j0.4004 (0.431 ∠68.4°) Ω/ km
Zero sequence impedance0.3246 + j1.228 (1.27 ∠75.2°) Ω/ km
Current capacity (A)487
SEL 311 – Line Protection

Protection Settings Calculations for Lines

SEL-311C Distance Protection Settings
Distance Zone
Non-Homogeneous Correction Angle
Load Impedance and Load Encroachment
Power Swing Detection/ Out of Step Detection
Switch on to Fault (SOTF)
Fuse failure scheme OR Loss of Potential (LOP)

SEL-351A Back-up Over Current Settings
Back up over current settings

Technical Data of the Power Transformers

Transformers-1
Type of cooling ONAN / ONAF
Vector Group Dyn11
Rated Voltage HV (V) 132000
Rated Voltage LV (V) 11500
Full Load current HV (A) 87.48 / 113.72
Full Load current LV (A) 1004.12 / 1305.35
Rated Power (MVA) 20 / 26
% impedance at the normal tap (12 no.) 10.15% / 13.20 %
Type of tap changer On load
the voltage at the maximum tap (V) 145200
Voltage at the minimum tap (V) 118800
Transformers- 2
Type of cooling ONAN / ONAF
Vector Group Dyn11
Rated Voltage HV (V) 132000
Rated Voltage LV (V) 11500
Full Load current HV (A) 43.7 / 56.9
Full Load current LV (A) 502 / 652.7
Rated Power (MVA) 10 / 13
% impedance at the normal tap (12 no.) 10.15% / 13.20 %
Type of tap changer On load
The voltage at the maximum tap (V) 145200
Voltage at the minimum tap (V) 118800
SEL-787 Transformer Protection Relay

Protection Settings Calculations for Power Transformers

SEL-787 Transformer Differential Protection
Differential Pick-up
Slope-1 Setting
Slope-2 Setting
Differential Unrestrained (U87P (Un-restrained Differential Pick-up))
2nd HARMONIC
5th HARMONIC

SEL-351A Transformer HV Over Current
Pick-up Setting
51PP (for phase fault element)
51GP (for earth fault element)
Time Multiplier Setting

SEL-551C Feeder Over-Current and Earth Fault

11 kV Outgoing Protection Settings

SEL-551C LT Over-Current and Earth Fault
CDG21 LT Neutral Standby AC series Earth Fault

126 Replies to “Relay Settings Calculations”

  1. avatar

    I need transformer differential protection in micom and siemens siprotec relay

        1. avatar

          thanks for your comment

  2. avatar

    i am looking at REM 615 – motor protection relay setting calculations, stuck up at relay/motor curve (hot/cold)?

    1. avatar

      on your email

      1. avatar

        Can i get a copy of relay setting calculations.
        Thanks

        1. avatar

          text us on WhatsApp:+989129613659

  3. avatar

    Please share some relay setting calculations excels ,pdf or doble or RIO test kit calculation files if you have any so that we could purchase it on this website ?

    THANKS …

  4. avatar

    sir
    please share calculation sheet of GE D60 and SEL Distance elay.

    1. avatar

      do not have sheet of GE D60 and SEL Distance relay

      1. avatar

        SIR
        I need line protection calculation 21/21G calculation sheet

  5. avatar

    Dear Sir,
    I need line protection calculation (21/21G) using SEL-311c
    Thanks!

    1. avatar

      please check your email

      1. avatar

        Please share relay calculation excel sheet

        1. avatar

          kindly check ur email for Relay Settings Calculations / Helpful Excel Spreadsheets for Protection Engineers

          1. avatar

            Please send also relay setting calculation excel thank you

  6. avatar

    HOW CAN I DOWNLOAD?

    1. avatar

      Please check your email for Relay Settings Calculations

      1. avatar

        Please send relay settings calculation

        1. avatar

          check your email

      2. avatar

        I also need this file. Please share

      3. avatar

        Please send also relay setting calculation excel thank you

      4. avatar

        Can I also have a copy of the relay settings calculations? Thanks

        1. avatar

          plz txt on WhatsApp: +989129613659

    2. avatar

      Sir please send relay calculation tutorial and excel sheet
      Thank you

      1. avatar

        this file is for our users only, you should enroll in any of our training packages like DIGSI 4, DIGSI 5, PCM600, ETAP, ABB PCM 600 ..

  7. avatar

    I need protection grading, Simulation excel, for 33/11kV voltage level protection . OC (IDMT + HIGH STAGE) AND EF (same as OC) only.. please help.

    1. avatar

      cant download from this page.. please help…

      1. avatar

        has been sent to ur email pls check for Relay Settings Calculations

    2. avatar

      please check ur email for Helpful Excel Spreadsheets for Protection Engineers

    1. avatar

      would u plz check your email, dear?!

  8. avatar

    Sir,

    How do we download the helpful spreadsheets on this site?

    1. avatar

      Pls check ur email

  9. avatar

    Could you please send me a copy of the PDF thank you.

    1. avatar

      Yes, pls check ur email

  10. avatar

    Dear sir, kindly share relay settings excel sheet

  11. avatar

    dear sir,
    please share transformer protection relay settings calculation

    1. avatar

      Dear dinesh , pls check ur email Relay Settings Calculations

  12. avatar

    Please share relay calculation excel sheet

    1. avatar

      replied on ur email

  13. avatar

    Please sent to me for relay calculation

    1. avatar

      kindly check ur email

  14. avatar

    Dear Sir
    How can i download ?

    1. avatar

      Dear keejeong, pls check ur email for Relay Settings Calculations

  15. avatar

    Please share relay calculation excel sheet

    1. avatar

      pls check ur email

  16. avatar

    Sir,

    How do we download the helpful spreadsheets on this site?

    1. avatar

      pls check ur email

  17. avatar

    Kindly send the complete relay settings calculations

    1. avatar

      check your email, dear Shiva

      1. avatar

        Send me MV Motor Relay setting Up To 800Kw.

        1. avatar

          please txt your request on WhatsApp: +989129613659

  18. avatar

    Link for downloading relay setting calculation, please

    1. avatar

      check your email, Kire

  19. avatar

    Sir, how do i download these calculation on this site

    1. avatar

      pls check ur email for RELAY SETTINGS CALCULATIONS

      1. avatar

        please send me RELAY SETTINGS CALCULATIONS

  20. avatar

    How can i download it?

    1. avatar

      pls check your email

  21. avatar

    Please share relay calculation excel sheet

    1. avatar

      Details have been sent to your email with subject: Relay Settings Calculations / Helpful Excel Spreadsheets for Protection Engineers

  22. avatar

    Please share relay calculation excel sheet.
    Relay Settings Calculations / Helpful Excel Spreadsheets for Protection Engineers

    1. avatar

      Kindly check your email, you should be a member of our website to access these files.

  23. avatar

    Please share relay calculation excel sheet….

    1. avatar

      yes, pls check your email

  24. avatar

    pls send me

    1. avatar

      This product is free for our customers only, and unfortunately, your email is not on our customer list. You can buy any of our training packs (DIGSI 4, DIGSI 5, IEC 61850, ETAP, PSCAD, …), then you can access our free files.

  25. avatar

    How i can download this document? I work at power company, my company use some protection relay, SEL, Siemens, Schneider, GE,…I need this document, pls send to my email. Thanks

    1. avatar

      kindly check your email.

  26. avatar

    Dear sir,
    can you please send me calculation spreedsheats?

    1. avatar

      please check your email for detail

  27. avatar

    Dear sir/madam,
    Could you please share the setting calculation document.
    Thank you in advance!

    1. avatar

      emailed to u

  28. avatar

    Hi

    I would like to take course . How do I go about it?

    1. avatar

      Hi, kindly check your email for Protection Relay pack

  29. avatar

    do you have GE d60 setting calculator ?

    1. avatar

      Do not have GE d60 setting calculator

  30. avatar

    Hi, I need Simulation excel sheet for 50/51, 51N, 64R, 87T, 49 and 59 relays.. please help.

  31. avatar

    Could you please send me a copy of the PDF thank you.

    1. avatar

      kindly check your email for Relay Settings Calculations

  32. avatar

    Please provide the relay calculation exel sheets

    1. avatar

      plz send your request on our WhatsApp: +989129613659

  33. avatar

    How can i download the relay setting calculation?

    1. avatar

      check ur email pls Relay Settings Calculations

  34. avatar

    Can you please send me the relay settings calculations excel files? Thank you!

    1. avatar

      kindly check ur email for details

  35. avatar

    Could you please share the relay settings calculations spreadsheet? thank you!

    1. avatar

      yes, please check ur email for Relay Settings Calculations

      1. avatar

        Checked but didn’t receive any. Please send again. Thank you!

  36. avatar

    Kindly assist with transformer diff, line protection, etc PDF and Excel calculations. I will be grateful.

    1. avatar

      pls check ur email for the Helpful Excel Spreadsheets for Protection Engineers

  37. avatar

    Hello, I am needing this material please send them to me.

    Best regards,

    Jesus Silva

    1. avatar

      Hello, please check your email for details

  38. avatar

    Can you share calculations spreadsheet for protection engineers?

    1. avatar

      pls check ur email

  39. avatar

    Dear Sir/Madam,

    Please send the download link to my mail address

    Thanks and Regards,

    S Dasgupta

    1. avatar

      Hi Dasgupta
      Please check your email for the Relay Settings Calculations

  40. avatar

    I need distance protection calculation with tapping.

    1. avatar

      This training package is not competed yet, we will update you once it is done

  41. avatar

    PLEASE SEND INFORMATION … MY EMAIL. THANKS SO MUCH

    1. avatar

      sent to ur email
      please check your email for the topics of the Helpful Excel Spreadsheets for Protection Engineers

  42. avatar

    How to set 49M IN 7SK82
    WHAT IS TIME CONSTANT & K FACTOR HOW TO ARRIVE THESE VALUE

    1. avatar

      Join our WhatsApp groups and share your problem there. text on WhatsApp plz: +989129613659

  43. avatar

    Hello Sir/Madam,

    I need HT Motor Protection Relay setting calculations for Siemens 7SJ61, 7SJ66, and 7SK80

    1. avatar

      Please contact Elec-Engg support team on WhatsApp. number: +989129613659

  44. avatar

    Hello Sir/Madam.

    I need HT Motor Protection Relay Setting Calculations for Siemens 7SJ61, 7SJ66, and 7SK80.

  45. avatar

    Please send relay settings calculation

  46. avatar

    please send me spread sheets

    1. avatar

      kindly check your email

  47. avatar

    Please send me excel sheet for relay settings & calculations.

    1. avatar

      please check your email for the Relay Settings Calculations

  48. avatar

    Please share the Relay Settings Calculations and excel files as well.

    Thanks

    1. avatar

      sent to your email

  49. avatar

    I need SEL-311C Distance protection settings calculation.

    1. avatar

      plz text our support team on WhatsApp: +989129613659

      1. avatar

        Can you send to be via emails.

  50. avatar

    Hello, i am looking RET615 differential protection calculation example. Could you help me?

    1. avatar

      plz ask your question on WhatsApp: +989129613659

    1. avatar

      for this req, txt us plz on whatsapp: +989129613659

  51. avatar

    Can I get any spreadsheet for Motor Protection relay REM 615 or any other motor protection relay?

    1. avatar

      plz txt on WhatsApp: +989129613659

  52. avatar

    Can you please send me a copy of the calculation sheet and calculation notes rscvreddy@gmail.com