Skip to main content

Generator Protection Training

(3 customer reviews)

80

Category:

Description

Main course:

Part A: Introduction, review the generator construction and protection

  • GA 01 (10 minDec 30, 2021): Cylindrical and salient pole rotors, generator connections, normal Operation, abnormal Conditions, generator protection, function of a protection System, generator grounding techniques, fault Current Behavior of a synchronous generator
  • GA 02 (12 minDec 30, 2021): stator winding faults, field winding or rotor circuit faults, abnormal operating conditions, the object of the protection system, generator protective relaying technology, multifunction generator protection systems (MGPS), numerical relays, generator ANSI codes, IEEE Recommendations for different Generator protection functions, an overview of different generator relays from different manufactures (ABB, Schneider, SEL, Siemens)
  • GA 03 (08 minDec 30, 2021): The review of REG 670 relay, the hardware structure of REG670, rearview and front view of REG670, main protection functions, backup protection functions, control & monitoring functions, REG670 templates (A20, B30, C30)
  • GA 04 (18 minDec 30, 2021): REG670 configuration (online, offline)
  • GA 05 (17 minDec 30, 2021): REG670 configuration (online, offline)
  • GA 06 (10 minDec 30, 2021): injecting signals and monitoring in the REG670 signal monitoring, config binary outputs
  • GA 07 (12 min, Dec 30, 2021): signal monitoring and troubleshooting technique
  • GA 08 ( 22 min, Dec 30, 2021): config and testing of the inverse time overcurrent in REG670
  • GA 09 (23 minDec 30, 2021): config and settings of the directional overcurrent in REG670
  • GA 10 (06 min, Dec 30, 2021): testing of the directional directional in REG670
  • GA 11 (10 minJan 20, 2022): theory of operation of synchronous AC Generator, typical generation systems, grounding strategies

Part B: Generator differential protection

  • GB 01 (04 minJan 08, 2022): Review of the generator protection functions in Single line diagram
  • GB 02 (03 minJan 08, 2022): Principal of differential protection function
  • GB 03 (10 minJan 08, 2022): Configurations and parameters of the generator differential protection block
  • GB 04 (01 minJan 20, 2022): phase differential element

Part C: Generator stator earth fault protection

  • GC 01 (06 minJan 20, 2022): why stator earth fault protection, 59N, 27TN, 100 % stator earth fault protection
  • GC 02 (08 minJan 20, 2022): stator earth fault protection
  • GC 03 (06 minJan 20, 2022): Configuration and parameter settings of the 100 stator earth fault function block

Part D: Generator Under excitation / Loss-of -Excitation (ANSI 40 ) protection

  • GD 01 (03 minJan 20, 2022): causes of loss of field, generator capability curve, end region heating, steady-state stability limit, under excitation limiter
  • GD 02 (08 minJan 20, 2022): Generator Capability Curve
  • GD 03 (02 minJan 20, 2022): PQ plane and RX plane
  • GD 04 (07 minJan 20, 2022): Impact of the generator loss of excitation
  • GD 05 (04 minJan 20, 2022): generator loss of excitation protection
  • GD 06 (05 minJan 20, 2022): Configuration and parameter settings of the loss of excitation function block

Part E: Generator Out of Step Protection (Pole Slip)

  • GE 01 (01 minJan 20, 2022): generator loses synchronism or Out of-step or pole slip definition
  • GE 02 (19 minJan 20, 2022): generator pole slip
  • GE 03 (18 minJan 20, 2022): generator pole slip protection
  • GE 04 (09 minJan 20, 2022): Configuration and parameter settings of the pole slip function block

Part F: Generator negative sequence protection

  • GF 01 (03 minJan 29, 2022): Negative Sequence Protection (46)
  • GF 02 (09 minJan 29, 2022):
  • GF 03 (02 minJan 29, 2022): continuous and short-time unbalanced current capabilities

Part G: Generator low forward and Reverse Power (Anti-Motoring or Loss of Prime Mover protection)

  • GG 01-03 (12 minJan 29, 2022): potential damages for each generator type

Part H: Generator Over-Under Frequency and Generator under-voltage protection

  • GH 01 (06 minJan 29, 2022): Over-Under Frequency (81U, 81O)
  • GH 02 (03 minJan 29, 2022): under-voltage protection (27, 59G)

Supplementary files:

Update December 22, 2021

  1. Synchronous generator protection (.pdf)
  2. Underimpedance protection ANSI 21B (.pdf)
  3. Generator Overfluxing protection ANSI 24 (.pdf)
  4. Generator Loss of field protection ANSI 40 (.pdf)
  5. Inadvertent energization protection ANSI 50/27 (.pdf)
  6. 100% stator earth fault protection ANSI 64G (.pdf)
  7. Generator Pole slip protection ANSI 78PS (.pdf)
  8. ABB generator protection e-book (.pdf)
  9. Areva generator protection e-book (.pdf)
  10. Protection against loss of excitation in generators (.pdf)
  11. Loss-of-excitation Protection for Synchronous Generators (.pdf)
  12. Application of Out-of-Step Blocking and Tripping Relays (.pdf)
  13. Generating Station Protection (.pdf)
  14. IEEE Guide for AC Generator Protection (.pdf)
  15. Standard PRC Generator Frequency and Voltage Protective Relay Settings (.pdf)
  16. REG216 Manual (.pdf)
  17. REG316 Manual (.pdf)
  18. Generator protection relay settin calulations (.pdf)
  19. Generator protection (.pdf)
  20. Protection of Synchronous Generators (.pdf)
  21. IEEE Guide for Abnormal Frequency Protection for Power Generating Plants (.pdf)
  22. IEEE Guide for AC Generator Protection (.pdf)
  23. IEEE Guide for Generator Ground Protection (.pdf)
  24. IEEE Guide for AC Generator Protection (.pdf)
  25. A-C GENERATOR AND MOTOR PROTECTION (.pdf)
  26. SIPROTEC Multi-Functional Generator Protection Relay 7UM61 (.pdf)
  27. SEL-300G Generator Relay (.pdf)
  28. SEL-700G Family of Generator and Intertie Protection Relays (.pdf)
  29. G60 Generator Protection System (.pdf)
  30. Generator protection REG670 (.pdf)
  31. Sepam 2000 Generator (.pdf)
  32. Generator Data Sheet (.pdf)
  33. CT Performance in Differential Relay Circuits (.pdf)
  34. Dynamic and Steady State Stability Limits (.pdf)
  35. Swing Impedance Locus Calculation Using Excel (.pdf)
  36. Generator Shaft Torsional Transients (.pdf)
  37. Generator Normal Operations (.pdf)
  38. Generator Short Circuit Calculations (.pdf)
  39. Generator Differential Relay: 87G (.pdf)
  40. Backup Fault Protection (.pdf)
  41. Generator Ground Fault Protection (.pdf)
  42. Unbalanced Current Protection (.pdf)
  43. Motoring Protection (.pdf)
  44. Overexcitation (.pdf)
  45. Abnormal Frequency Protection (.pdf)
  46. Minimum Excitation Limiter (.pdf)
  47. Loss of Synchronism (.pdf)
  48. Loss of Field Protection (.pdf)
  49. Synchronization Protection (.pdf)
  50. Accidental Energization Protection (.pdf)

Update Feb 02, 2022

REG670 excel spreadsheets (Revision01): Helpful excel file to set the REG670 parameters

 

Course Details:

https://elec-engg.com/generator-protection-training-package/

3 reviews for Generator Protection Training

  1. Hamdan

    is it helpful for me as a beginner?

    • Protection Engineer

      Yes, it is

  2. Neetish

    Highly practical. I really enjoyed it

  3. Faisal abbass

    Instructor is excellent.
    It’s very helpful and good material in this training package.

Add a review

Your email address will not be published. Required fields are marked *