Advanced SIPROTEC 5 & DIGSI 5 Online Training Course – Professional Protection Relay Engineering
Introduction
Are you looking to develop advanced engineering skills in Siemens SIPROTEC 5 protection relays and DIGSI 5 configuration software?
The Advanced SIPROTEC 5 & DIGSI 5 Online Training Course, offered by Elec-Engg, is designed for protection engineers, commissioning engineers, substation automation specialists, and electrical engineers who want to gain practical knowledge of modern Siemens protection and control systems.
SIPROTEC 5 is one of Siemens’ advanced protection relay platforms, offering flexible protection functions, powerful automation capabilities, communication interfaces, and comprehensive engineering tools.
However, working effectively with SIPROTEC 5 requires more than understanding relay settings. Engineers must also understand device configuration, protection function integration, communication engineering, IEC 61850, logic programming, testing, and troubleshooting.
This training focuses on these practical engineering requirements using DIGSI 5, Siemens’ engineering software for configuring, parameterizing, testing, and commissioning SIPROTEC 5 devices.
















Who Should Attend This Training?
This course is particularly suitable for:
- Protection and control engineers.
- Substation automation engineers.
- Electrical commissioning engineers.
- Protection relay testing engineers.
- Maintenance and operation engineers.
- Engineers working with Siemens SIPROTEC 5 devices.
- Engineers transitioning from SIPROTEC 4 and DIGSI 4 to SIPROTEC 5 and DIGSI 5.
Previous experience with protection relays and basic electrical power system protection is recommended.
Advanced SIPROTEC 5 & DIGSI 5 Training – Course Topics
The training program covers advanced engineering subjects, with the specific scope adapted to the participant’s requirements and engineering applications.
1. Advanced DIGSI 5 Engineering
- DIGSI 5 project structure and engineering workflow.
- Creating and managing SIPROTEC 5 projects.
- Device configuration and parameterization.
- Hardware configuration and module selection.
- Function point management and device capabilities.
- Parameter sets and setting group management.
- Device information and configuration management.
- Downloading and uploading device configurations.
- Online and offline engineering.
- Configuration comparison and troubleshooting.
2. Advanced Protection Function Configuration
Practical engineering of different SIPROTEC 5 protection functions, including:
- Overcurrent and earth fault protection.
- Directional overcurrent protection.
- Distance protection.
- Transformer differential protection.
- Restricted earth fault (REF) protection.
- Busbar protection.
- Generator protection.
- Motor protection.
- Breaker failure protection.
- Automatic reclosing and synchronism check.
The training can focus on specific SIPROTEC 5 device families and protection applications.
3. IEC 61850 Engineering and Substation Communication
IEC 61850 is a fundamental technology in modern digital substations.
This section covers:
- IEC 61850 communication architecture.
- Logical devices and logical nodes.
- Data objects and data attributes.
- GOOSE communication configuration.
- GOOSE publishing and subscribing.
- IEC 61850 client/server communication.
- Report control blocks.
- SNTP time synchronization.
- SCL files and engineering workflow.
- Integration of SIPROTEC 5 devices into substation automation systems.
- Communication testing and troubleshooting using engineering tools.
4. CFC – Continuous Function Chart Engineering
CFC provides powerful logic engineering capabilities in SIPROTEC 5.
Topics include:
- Introduction to CFC engineering.
- Creating and modifying logic charts.
- Function blocks and signal processing.
- Binary signal processing.
- Protection and control logic.
- Interlocking applications.
- Alarm and indication processing.
- Logic testing and troubleshooting.
- Practical engineering examples.
5. Advanced Control and Automation Functions
- Control functions and switching operations.
- Circuit breaker and disconnector control.
- Interlocking logic.
- Local and remote operation.
- Command processing.
- Signal mapping.
- Binary inputs and outputs.
- Automation logic and functional testing.
6. Advanced Testing with DIGSI 5
- Protection function testing.
- Testing and verification of relay settings.
- DIGSI 5 Test Suite.
- Test sequence configuration.
- Functional testing.
- Verification of protection characteristics.
- Binary input and output testing.
- Communication and GOOSE testing.
- Test documentation and reports.
7. SIPROTEC 5 Digital Twin and WebUI
- Introduction to SIPROTEC 5 Digital Twin concepts.
- Virtual device and engineering verification.
- Device WebUI functionality.
- Online monitoring and diagnostics.
- Device information and operational status.
- Engineering and troubleshooting applications.
8. Cybersecurity and Device Security
- SIPROTEC 5 security concepts.
- User management and access permissions.
- Device security configuration.
- Secure engineering access.
- Security-related settings and considerations.
- Practical security configuration using DIGSI 5.
9. Practical Commissioning and Troubleshooting
- Preparing SIPROTEC 5 devices for commissioning.
- Checking device hardware and configuration.
- Verification of CT and VT circuits.
- Binary input/output verification.
- Protection function verification.
- GOOSE communication troubleshooting.
- Event and fault record analysis.
- Identifying configuration errors.
- Practical commissioning procedures.
Supported SIPROTEC 5 Applications
Depending on the training requirements, practical sessions can cover different SIPROTEC 5 device families and applications, including:
- SIPROTEC 5 line protection – 7SA series.
- SIPROTEC 5 transformer protection – 7UT series.
- SIPROTEC 5 busbar protection – 7SS series.
- SIPROTEC 5 feeder protection – 7SJ series.
- SIPROTEC 5 motor protection.
- SIPROTEC 5 automatic transfer and switching applications.
Training can also focus on specific devices such as 7SA8, 7UT85, 7SS85, and other SIPROTEC 5 models.
Why Choose Elec-Engg for SIPROTEC 5 Training?
At Elec-Engg, our training philosophy is based on practical engineering applications rather than simply explaining software menus or theoretical concepts.
Our objective is to help engineers understand:
- Why a particular protection function is required.
- How to configure protection functions correctly.
- How different protection and control functions interact.
- How to implement automation logic.
- How to configure IEC 61850 communication.
- How to test and verify the final configuration.
- How to identify and solve real engineering problems.
Practical courses by Dr. Saeed Roostaee / Elec-Engg focus on real-world power system protection and substation automation applications.
Online SIPROTEC 5 & DIGSI 5 Training
The advanced SIPROTEC 5 and DIGSI 5 training program is available through online delivery based on request.
The training scope can be customized according to:
- Your existing experience with SIPROTEC relays.
- The SIPROTEC 5 models used in your projects.
- Your engineering and commissioning responsibilities.
- The specific protection functions you need to study.
- Your requirements for IEC 61850 and substation automation.
Whether you want to improve your DIGSI 5 engineering skills, develop advanced protection configurations, or prepare for SIPROTEC 5 commissioning projects, we can discuss a suitable training program.
Frequently Asked Questions
1. Do I need previous experience with SIPROTEC 5?
Basic knowledge of protection relays and power system protection is recommended. Engineers with SIPROTEC 4 and DIGSI 4 experience can also benefit from this advanced training.
2. Is this training focused on DIGSI 5 or SIPROTEC 5?
Both. The course combines DIGSI 5 engineering software with practical SIPROTEC 5 protection, control, communication, and automation applications.
3. Does the course cover IEC 61850?
Yes. IEC 61850 engineering, GOOSE communication, logical nodes, SCL files, and communication troubleshooting can be included.
4. Can the training focus on a particular SIPROTEC 5 relay?
Yes. The scope can be customized for specific devices such as 7SA8, 7UT85, 7SS85, and other SIPROTEC 5 models.
5. Is face-to-face training available?
Please contact us to discuss your training requirements and available delivery arrangements. Online training is available based on request.
Enroll or Request More Information
Are you ready to improve your advanced Siemens protection relay engineering skills?
Contact Elec-Engg to discuss your requirements and arrange an online SIPROTEC 5 and DIGSI 5 training program.
Training by Dr. Saeed Roostaee
1 Config Relay
- Add Relay
- Order Code
- Application Template
2 Installed and Configured Relay
- Add Relay, Copy Relay
- Retrieve Device Config
- Export Device
- Export Project
