SFT2841

The SFT2841 software is the setting and operating tool for Sepam series 20, Sepam series 40, and Sepam series 80 Relays. It may be used to:

• Commissioning offline to prepare Sepam protection and parameter settings
• Load, unload, and modify Sepam protection and parameter settings
• Obtain all measurements and useful information during commissioning
• Manage the protection system
• Monitor the status of the electrical network
• Run diagnostics on any incidents affecting the electrical network

Preparation of Sepam parameter and protection settings in offline mode

• Configuration of Sepam and optional modules
• Enabling/disabling of functions and entry of protection settings
• Adaptation of predefined control and monitoring functions
• Creation of personalized mimic diagrams for local display

SEPAM commissioning in online mode

• Access to all functions available in unconnected mode, after entering the password
• Transfer of Sepam parameter and protection setting file, prepared in offline mode, protected by the password
• Display of all measurements and useful information during commissioning
• Display of logic input, logic output, and LED status
• Test of logic outputs
• The setting of configuration bits, timers, etc.

SFT2841 connection to SEPAM Connection of the PC serial port to the communication port on the front panel of Sepam series 20, Sepam series 40, or Sepam series 80 using the CCA783 cord or the USB/RS232 (TSXCUSB232) converter + CCA783.

---

SEPAM and VAMP Catalog  SEPAM 80 Manuals and Catalog  

---

Related Topic: SEPAM Protection Relays

---

Keywords: sft2841 Download and Installation Guide with sft2841 serial number; sft2841 download; sft2841 download; sft2841 user manual; registration schneider electric; schneider product registration;  sft2841 authorization code; sft2841 software download;  sft2841 software serial number; SFT2841 password; SFT2841 authorization code; SFT2826 software download; sepam relay manual