- The most complete training in DIGSI 5 & SIPROTEC 5 training (basic to advanced level)
- By a reputed instructor ( Dr. Saeed Roostaee)
- Face-to-face training
- Location (we can manage it in our office or your office or a hotel nearby you)
- Duration: 3 days (24 hours)
The following list provides an overview of the tasks we will do in this training:
- DIGSI 5 Setup
- Additional Steps upon First Time Use of DIGSI 5
- DIGSI 5 startup
- DIGSI 5 and SIPROTEC 5 Vs. DIGSI 4 and SIPROTEC 4
- User Interface, Project, and Project Tree
- Creating a topology as a single-line configuration
- Incorporating SIPROTEC 5 devices into the topology
- Configuring hardware of a SIPROTEC 5 device
- Defining the functional scope of a SIPROTEC 5 device
- Defining individual function settings
- Routing information
- Editing display pages
- Configuring function charts (CFC)
- Configuring the communication network and setting communication settings
- Displaying saved measured values and indications
- Displaying saved fault records and evaluating them with SIGRA
- Exporting and printing data
- Creating test sequences
- Transmitting settings values from DIGSI 5 to the SIPROTEC 5 device
- Transmitting settings values from the SIPROTEC 5 device to DIGSI 5 and saving them in files
- Transmitting indications, measured values, and fault records from the SIPROTEC 5 device to DIGSI 5 and saving them in files
- Setting limiting values
- Testing SIPROTEC 5 devices and functions
- Controlling equipment
- Initial startup or restart of the SIPROTEC 5 device
- Setting the date and time of the SIPROTEC 5 device
- Several versions of one device type
- Working Offline and Online with SIPROTEC 5 device
- Managing Device Drivers
- Firmware for SIPROTEC 5 devices
- Firmware for communication modules
- Communication protocols
- Communication mappings
- Checking for New DIGSI 5 Version
- Library elements
- Elements for the hardware catalog
- Selecting an application template
- Open the DIGSI 5 Information Routing to route information with complete details
- Open the DIGSI 5 Display Editor to edit display pages with complete details
- Open the DIGSI 5 Function-Chart (CFC) Editor to configure additional functions such as interlockings with complete details
- Open the DIGSI 5 Network View to configure a communication network with complete details
- Display saved measured values and indications in DIGSI 5 and SIPROTEC 5 with complete details
- Display saved fault records in DIGSI 5 with complete details
- Export and print data in DIGSI 5 with complete details
- Transfer indications, measured values, and fault records from the SIPROTEC 5 device to DIGSI 5 with complete details
- Test SIPROTEC 5 devices and functions using the test suit in DIGSI 5 with complete details
- Control Equipment with complete details
- Find and edit SIPROTEC 5 devices connected to a network with complete details
- Config and parameters of the SIPROTEC 5 Overcurrent protection phases 50/51
- Config and parameters of the SIPROTEC 5 Overcurrent protection, ground 50N/51N
- Config and parameters of the SIPROTEC 5 Directional overcurrent protection 67
- Config and parameters of the SIPROTEC 5 Negative sequence 46
- Config and parameters of the SIPROTEC 5 Voltage-dependent overcurrent protection 51V
- Config and parameters of the SIPROTEC 5 Directional overcurrent protection, ground 67N
- Communication mapping
- Device settings
- Time settings
- Power system data
- Measuring points info and settings
- Fault recorder settings
- CT connection types
- VT connection types
- Circuit-breaker function group
- Voltage-current 3-phase function group
- Entering settings based on secondary, primary, or percent
- Current-flow criterion:
- Closure detection:
- Current thresh. CB open parameter
- Output time parameter
- Blk. Op. Ind. & Fault Rec. parameter
- Reference value parameter
- Current limitation Imax parameter
- 7SJ8x Overcurrent Protection Functions
- SIPROTEC relay families with the features and applications
- SIPROTEC 7SX800
- SIPROTEC 5 family
- Browser-based user interface
- Checking and adjusting the values of a specific setting
- Comparing the values of 2 or more devices
- Checking a setting value against a user-defined setting to verify whether the setting value differs from the default value specified by Siemens
- Querying a value in order to adjust a test case, for example to preset the tripping current
- Viewing all types of measured values, for example, functional measured values and derived values such as the minimum/maximum and mean values
- Displaying the deviation of the expected measured-value quality.
- Explain & Config signal “fault log is full”
- Setting-History Log
- Operational Log
- Fault Log
- Fault Definition
- Ground-Fault Log
- Motor-Starting Log
- Security Log
- Device-Diagnosis Log
- Communication Log
- Communication-Supervision Log
- Reading Fault Records
- Config Sampled values of analog measuring inputs (currents and voltages) in the DIGSI 5 & SIPROTEC 5 fault-record
- Config Internal measured values of measured value preprocessing in DIGSI 5
- Config Internal function and operational measured values in SIPROTEC 5 fault recorder
- Config SIPROTEC 5 Binary status signals (internal or external) into the fault recorders
- User-Defined Configuration of the Start Criterion for Fault Recording
- Spontaneous indication in DIGSI 5
- Copy online SIPROTEC 5 device to the DIGSI 5 project
- And much more will be added soon …
Additional information:
SIPROTEC 5 IO Modules:
- SIPROTEC 5 IO201 with 8 binary inputs, 6 binary outputs (6 fast relays), 4 current transformers
- SIPROTEC 5 IO202 with 8 Binary inputs, 6 Binary outputs (6 Fast relays), 4 Current transformers, and 4 Voltage transformers
- SIPROTEC 5 IO203 with 4 binary inputs, 4 binary outputs (4 fast relays), 8 current transformers
- SIPROTEC 5 IO205 with 12 Binary inputs and 16 Binary outputs (16 Standard relays)
- SIPROTEC 5 IO206 with 6 binary inputs and 7 binary outputs (7 standard relays)
- SIPROTEC 5 IO207 with 16 binary inputs and 8 binary outputs
- SIPROTEC 5 IO208 with 4 binary inputs and 11 binary outputs, 4 current transformers, and 4 voltage transformers
- SIPROTEC 5IO209 with 8 Binary inputs and 4 Binary outputs
- SIPROTEC 5 IO214 with 2 Binary inputs, 5 Binary outputs (5 Fast relays), 4 Current transformers, and 4 Voltage transformers
- SIPROTEC 5 CB202 for 3 Plug-in modules, port positions M, N, P
more details on SIPROTEC 5 Hardware Description
The spontaneous indication log which is available in online mode is a very good tool for testing and commissioning the SIPROTEC 5 devices. This log shows the indications immediately at the moment of occurrence (No wait for a cyclical update or initiating the manual update).
DIGSI 5 & SIPROTEC 5 topics:
Parameter set, Connection to an online device, Updating firmware, showing truncated texts completely, Showing tooltips, The Add new device entry is an action. This lets you open a dialog to add a new SIPROTEC 5 device./ Open the Device View to configure the hardware of a SIPROTEC 5 device. Adjusting Working Area, Maximizing the DIGSI 5 working area, Minimizing DIGSI 5 working-area objects, Splitting the working area vertically or horizontally in DIGSI 5, Separating objects from the DIGSI 5 working area, Restoring the working area, Starting to Add Using the Project Tree in DIGSI 5, Single-line and display elements in DIGSI 5, Global DIGSI 5 Library, Starting to Add Using the Single-Line Configuration and the Library, Select Voltage Variant, Select function point class, And port J functionality, Application Template, Communication firmware version, Network view, and device view, Plug-in modules, Siprotec 5 online configurator, Update short product code list /TNS list, For instance, line protection, SIPROTEC 5 7SA, SIPROTEC 5 7sa82, SIPROTEC 5 7sa86, SIPROTEC 5 7sa87, SIPROTEC 5 7SJ, SIPROTEC 5 7SD, SIPROTEC 5 7SL, SIPROTEC 5 7VK, Overcurrent protection, phases 50/51, Overcurrent protection, ground 50N/51N, Directional overcurrent protection 67, Negative sequence 46, Voltage-dependent overcurrent protection 51V, Directional overcurrent protection, ground 67N
