SIPROTEC 5 & DIGSI 5 Training

• The most complete training in DIGSI 5 & SIPROTEC 5 training (basic to advanced level)
• By a reputed instructor ( Dr. Saeed Roostaee)
• Face-to-face training
• Location (we can manage it in our office or your office or a hotel nearby you)
• Duration: 3 days (24 hours)

The following list provides an overview of the tasks we will do in this training:

• DIGSI 5 Setup
• Additional Steps upon First Time Use of DIGSI 5
• DIGSI 5 startup
• DIGSI 5 and SIPROTEC 5 Vs. DIGSI 4 and SIPROTEC 4
• User Interface, Project, and Project Tree
• Creating a topology as a single-line configuration
• Incorporating SIPROTEC 5 devices into the topology
• Configuring hardware of a SIPROTEC 5 device
• Defining the functional scope of a SIPROTEC 5 device
• Defining individual function settings
• Routing information
• Editing display pages
• Configuring function charts (CFC)
• Configuring the communication network and setting communication settings
• Displaying saved measured values and indications
• Displaying saved fault records and evaluating them with SIGRA
• Exporting and printing data
• Creating test sequences
• Transmitting settings values from DIGSI 5 to the SIPROTEC 5 device
• Transmitting settings values from the SIPROTEC 5 device to DIGSI 5 and saving them in files
• Transmitting indications, measured values, and fault records from the SIPROTEC 5 device to DIGSI 5 and saving them in files
• Setting limiting values
• Testing SIPROTEC 5 devices and functions
• Controlling equipment
• Initial startup or restart of the SIPROTEC 5 device
• Setting the date and time of the SIPROTEC 5 device
• Several versions of one device type
• Working Offline and Online with SIPROTEC 5 device
• Managing Device Drivers
• Firmware for SIPROTEC 5 devices
• Firmware for communication modules
• Communication protocols
• Communication mappings
• Checking for New DIGSI 5 Version
• Library elements
• Elements for the hardware catalog
• Selecting an application template
• Open the DIGSI 5 Information Routing to route information with complete details
• Open the DIGSI 5 Display Editor to edit display pages with complete details
• Open the DIGSI 5 Function-Chart (CFC) Editor to configure additional functions such as interlockings with complete details
• Open the DIGSI 5 Network View to configure a communication network with complete details
• Display saved measured values and indications in DIGSI 5 and SIPROTEC 5 with complete details
• Display saved fault records in DIGSI 5 with complete details
• Export and print data in DIGSI 5 with complete details
• Transfer indications, measured values, and fault records from the SIPROTEC 5 device to DIGSI 5 with complete details
• Test SIPROTEC 5 devices and functions using the test suit in DIGSI 5 with complete details
• Control Equipment with complete details
• Find and edit SIPROTEC 5 devices connected to a network with complete details
• Config and parameters of the SIPROTEC 5 Overcurrent protection phases 50/51
• Config and parameters of the SIPROTEC 5 Overcurrent protection, ground 50N/51N
• Config and parameters of the SIPROTEC 5 Directional overcurrent protection 67
• Config and parameters of the SIPROTEC 5 Negative sequence 46
• Config and parameters of the SIPROTEC 5 Voltage-dependent overcurrent protection 51V
• Config and parameters of the SIPROTEC 5 Directional overcurrent protection, ground 67N
• Communication mapping
• Device settings
• Time settings
• Power system data
• Measuring points info and settings
• Fault recorder settings
• CT connection types
• VT connection types
• Circuit-breaker function group
• Voltage-current 3-phase function group
• Entering settings based on secondary, primary, or percent
• Current-flow criterion:
• Closure detection:
• Current thresh. CB open parameter
• Output time parameter
• Blk. Op. Ind. & Fault Rec. parameter
• Reference value parameter
• Current limitation Imax parameter
• 7SJ8x Overcurrent Protection Functions
• SIPROTEC relay families with the features and applications
• SIPROTEC 7SX800
• SIPROTEC 5 family
• Browser-based user interface
• Checking and adjusting the values of a specific setting
• Comparing the values of 2 or more devices
• Checking a setting value against a user-defined setting to verify whether the setting value differs from the default value specified by Siemens
• Querying a value in order to adjust a test case, for example to preset the tripping current
• Viewing all types of measured values, for example, functional measured values and derived values such as the minimum/maximum and mean values
• Displaying the deviation of the expected measured-value quality.
• Explain & Config signal “fault log is full”
• Setting-History Log
• Operational Log
• Fault Log
• Fault Definition
• Ground-Fault Log
• Motor-Starting Log
• Security Log
• Device-Diagnosis Log
• Communication Log
• Communication-Supervision Log
• Reading Fault Records
• Config Sampled values of analog measuring inputs (currents and voltages) in the DIGSI 5 & SIPROTEC 5 fault-record
• Config Internal measured values of measured value preprocessing in DIGSI 5
• Config Internal function and operational measured values in SIPROTEC 5 fault recorder
• Config SIPROTEC 5 Binary status signals (internal or external) into the fault recorders
• User-Defined Configuration of the Start Criterion for Fault Recording
• Spontaneous indication in DIGSI 5
• Copy online SIPROTEC 5 device to the DIGSI 5 project
• And much more will be added soon …

Additional information:

SIPROTEC 5 IO Modules:

• SIPROTEC 5 IO201 with 8 binary inputs, 6 binary outputs (6 fast relays), 4 current transformers
• SIPROTEC 5 IO202 with 8 Binary inputs, 6 Binary outputs (6 Fast relays), 4 Current transformers, and 4 Voltage transformers
• SIPROTEC 5 IO203 with 4 binary inputs, 4 binary outputs (4 fast relays), 8 current transformers
• SIPROTEC 5 IO205 with 12 Binary inputs and 16 Binary outputs (16 Standard relays)
• SIPROTEC 5 IO206 with 6 binary inputs and 7 binary outputs (7 standard relays)
• SIPROTEC 5 IO207 with 16 binary inputs and 8 binary outputs
• SIPROTEC 5 IO208 with 4 binary inputs and 11 binary outputs, 4 current transformers, and 4 voltage transformers
• SIPROTEC 5IO209 with 8 Binary inputs and 4 Binary outputs
• SIPROTEC 5 IO214 with 2 Binary inputs, 5 Binary outputs (5 Fast relays), 4 Current transformers, and 4 Voltage transformers
• SIPROTEC 5 CB202 for 3 Plug-in modules, port positions M, N, P

more details on SIPROTEC 5 Hardware Description

The spontaneous indication log which is available in online mode is a very good tool for testing and commissioning the SIPROTEC 5 devices. This log shows the indications immediately at the moment of occurrence (No wait for a cyclical update or initiating the manual update).

DIGSI 5 & SIPROTEC 5 topics:

Parameter set, Connection to an online device, Updating firmware, showing truncated texts completely, Showing tooltips, The Add new device entry is an action. This lets you open a dialog to add a new SIPROTEC 5 device./ Open the Device View to configure the hardware of a SIPROTEC 5 device. Adjusting Working Area, Maximizing the DIGSI 5 working area, Minimizing DIGSI 5 working-area objects, Splitting the working area vertically or horizontally in DIGSI 5, Separating objects from the DIGSI 5 working area, Restoring the working area, Starting to Add Using the Project Tree in DIGSI 5, Single-line and display elements in DIGSI 5, Global DIGSI 5 Library, Starting to Add Using the Single-Line Configuration and the Library, Select Voltage Variant, Select function point class, And port J functionality, Application Template, Communication firmware version, Network view, and device view, Plug-in modules, Siprotec 5 online configurator, Update short product code list /TNS list, For instance, line protection, SIPROTEC 5 7SA, SIPROTEC 5 7sa82, SIPROTEC 5 7sa86, SIPROTEC 5 7sa87, SIPROTEC 5 7SJ, SIPROTEC 5 7SD, SIPROTEC 5 7SL, SIPROTEC 5 7VK, Overcurrent protection, phases 50/51, Overcurrent protection, ground 50N/51N, Directional overcurrent protection 67, Negative sequence 46, Voltage-dependent overcurrent protection 51V, Directional overcurrent protection, ground 67N