PCM600, DIGSI, IEC61850 in-person training

6 days of training at your place by Dr. Saeed Roostaee

• ABB relays history
• PCM and connectivity pack installation
• An overview of the PCM 600 functionality
• Establish communication between the physical IED and PCM 600
• Manage project with PCM 600
• Hardware configuration
• Application configuration tool
• Read and write the tool in the PCM 600
• IED online monitoring and signal monitoring
• Event viewer and disturbance handling
• signal matrix editor tool
• Parameter setting tool in the PCM 600
• Writing configuration into IED
• Interlocking between application configuration and signals matrix tool in PCM600
• function blocks and naming based on IEC 61850 standard, IEC symbol, and ANSI code
• Distance protection function configuration
• 67N protection function configuration
• How to test ABB relays

• How to install DIGSI 4
• Introduction to SIPROTEC Relay families
• wiring connection
• start with DIGSI 4
• Archive, import, export
• Masking I/O
• Default and Control Display
• CFC
• Power system data 1
• Setting Group
• Oscillographic Fault Recorders
• General Device Settings
• SIPROTEC 5 – Devices and Fields of Application
• The basic function of SIPROTEC 5
• Installing DIGSI 5
• DIGSI Device Drivers
• Add new device
• The online SIPROTEC 5 configurator
• DIGSI 5 User interface and general setting
• Distance relay configuration
• Display Page configuration
• CFC Configuration
• busbar configuration
• How to test SIPROTEC relays

• An introduction to IEC 61850 & how to learn it effectively
• Overview of the main features of IEC 61850
• IEC 61850 data structure and data format
• IEC 61850 station in DIGSI 5 and IEC 61850 System Configurator
• GOOSE configuration and the publisher/subscriber LNs
• GOOSE simulation via IEDScout
• GOOSE configuration and simulation between different relays
• Time synchronization settings and SNTP configuration
• IEC 61850 configuration in DIGSI 4