6-day Training in Power System Protection

• Course Name: Power System Protection based on SIEMENS and ABB relays
• Trainer: Dr. Saeed Roostaee
• Location: Turkey
• Duration: one week
• Course define: 14 July 2023
• Last update: 22 July 2023
• Course start: 5 November 2023
• Certificate: On successful completion of this training course, Elec-Engg Certificate will be awarded to the delegates

Day 1: Power system protection & Numerical Relay IEDs

• Why power system protection
• Numerical relay history
• Numerical structure
• Numerical relay functionality
• symmetrical component
• ANSI Codes
• Current and Voltage Transformer Types, Specifications, and Applications
• Protection Zones
• Time-current Characteristics Curves
• Modern Software for Protection

Day 2: SIPROTEC & DIGSI

• SIPROTEC 5 Hardware and ordering
• Connect to SIPROTEC 5
• Working with SIPROTEC 5 in online mode
• Indications and logs
• Recorder
• Relay configuration
• Functions and Settings

Day 3: ABB Relion & PCM 600

• ABB relays history
• PCM and connectivity pack installation
• Add IEDs
• Hardware configuration
• Application configuration
• Distance relay config
• Busbar relay config

Day 4: Feeder & Line Protection

• Overcurrent
• IDMT O/C & E/F Protection
• Definite Time (DT) Protection
• High-set Instantaneous Protection
• Earth fault
• Directional OC
• Distance

Day 5: Busbar and Circuit Breakers

• Circuit breaker failure protection (CBF)
• busbar arrangement
• busbar differential protection function
• Protection Zone
• REB670 series hardware structure
• REB670 Configuration

Day 6: Generator & Transformer Protection

• Transformer Introduction
• Vector Group Connections
• Transformer Faults
• Transformer Differential Protection
• Restricted Earth Fault Protection(REF)
• Buchholz Relay and Pressure Relief Operations
• ABB RET 670 Hardware structure
• ABB RET 670 Transformer Protection Application Template
• ABB RET 670 Configuration and Function blocks
• Generator construction
• Generator differential protection
• Generator stator earth fault protection
• Generator Under excitation / Loss-of -Excitation (ANSI 40 ) protection
• Generator Out-of-Step Protection (Pole Slip)
• Generator negative sequence protection
• Loss of Prime Mover protection
• Generator Over-Under frequency
• Generator under-voltage protection
• REG670 configuration