SIEMENS Substation Automation System

• Course Name: SIEMENS SAS
• Pre-requisite training: DIGSI 4, DIGSI 5, IEC61850
• Language: English
• + Supporting Files
• + Certificate of completion
• Delivery: Face-to-face / Online
• Duration: 8 Days
• Trainer: Dr. Saeed Roostaee (Profile)

Substation Automation System

• Substation Automation System-an overview
• SIEMENS SAS In the past
• SIEMENS SAS Nowadays
• Network Theory (Types of Communications, Data Transmission Types, MAC Address, IP Address, Subnet Mask)
• Fundamentals of Communication Via Ethernet Various Topologies
• Ethernet and IEC 61850 Concepts (The EN100 Communication Module, Time Server, Switch, Network Card)
• Important Factors for Choosing a Topology
• Star Topology
• Ring Topology

Hardware

• RUGGEDCOM Ethernet Switch RS900
• RUGGEDCOM Ethernet Switch RS8000
• RUGGEDCOM Ethernet Switch RSG2100
• SIPROTEC Communication Modules
• Hirschmann Switches
• Siemens Scalance – Switches
• Modems
• I/O-Box 6MD61
• Bay Controller 6MD66
• Transformer Regulators
• SICAM 1703 device series – TM 1703 mic
• SICAM 1703 device series – TM 1703 ACP
• SICAM 1703 device series – BC 1703 ACP
• SICAM 1703 device series – AK 1703 ACP
• Siemens Serial Modem 7XV5655
• Siemens converter – Mini star coupler
• Com-Expander: Comtrol Rocket Port
• Operator Desk / Engineering PCs
• Time receiver
• external time masters
• NTP-time synchronization with SICLOCK
• Modem Splitter
• Station Unit 6MD9101
• SICAM PAS Station Unit

Bay Level Engineering (IEC 61850 and Modbus)

• Sample IEC 81850 Configuration
• Setting the Network Parameters for Ethernet Switches
• Modbus Connection of Measuring Centers
• Serial/Ethernet Converter (7XV5655)
• GPS Satellite Clock
• IEC 61850 – The Configuration Language SCL File Types at a glance
• ICD file – IED Capability Description
• SSD file – Substation Specification Description
• CID file – Configured IED Description
• SCD file – Substation Configuration Description
• IEC 61850 Services in IEDs and SICAM PAS
• Updating ICD – Files
• IEC 61850 – creating PAS configuration data
• Client/Server Communication
• Publisher / Subscriber Communication
• Logical Node
• Data Objects
• Standardizing Communication with Logical Nodes
• Addressing control of a circuit breaker
• Ethernet switches according to IEC61850 specification
• Ethernet Master clocks
• IEC61850 Engineering
• Process of IEC61850 Engineering
• Diagnosis Tool Networkview
• Diagnosis Tool IEC-Browser
• Config signals in the DIGSI 4 Matrix
• Config signals in the DIGSI 5 IEC61850 structure
• System Configurator in DIGSI
• Assign IEDs to the IEC 61850 Station
• Mapping GOOSE messages
• Updating device parameter files
• IEC 61850 Ethernet Medium: FO Ring
• IEC 61850 Ethernet Configuration: Electrical Star
• IEC 61850 Ethernet FO-Ring with RuggedCom
• IEC 61850 Ethernet FO-Ring with optical EN100
• IEC 61850 Ethernet – Partial Redundant FO-Ring
• IEC 61850 Ethernet – Redundant FO-Ring
• IEC 61850 Ethernet – with redundant PAS
• Sample Real Projects
• Export of Station Information
• Import of SCD-File into the SICAM PAS

Station Level Engineering SICAM PAS

• Introduction to SICAM PAS Automation System
• SICAM PAS Tasks
• Fields of Application
• SICAM PAS Features
• Scalability – Software and Hardware Configuration for Small to Large Applications
• Basic Package “ Full Server”
• Distributed system with higher performance (Full Server + DIP (Device Interface Processor))
• High availability by Redundancy
• High flexibility through further interfaces
• Optional Packages (IEC 61850, Profibus FMS (SICAM/SIPROTEC specified protocols), IEC 60870-5-103, DNP V3.00, Profibus DP, Modbus, ILSA (Internal LSA protocol, OPC-Client, Automation CFC)
• Substation Automation Functions (Control Authority, Bay Blocking, Telecontrol Blocking, Time Synchronization, Fault Recording, Redundancy)
• SICAM PAS in Star Configuration
• SICAM PAS in (Fiber Optic) Ring
• SICAM PAS FO Station LAN
• SICAM PAS Installation
• Licensing
• Licensing With Feature Enabler
• SICAM PAS Basic packet and options
• SICAM PAS Configuration User Administration Tool
• IEC 61850 Services in IEDs and SICAM PAS
• SICAM PAS Configuration (Working with Project Databases, Creating a New Database, Adding and Managing Systems, Adding an Application (IEC 61850 Client), Importing a SCD file, Updating One or Several Device(s), Adding ModbusApplication, Parameterizing ModbusApplication, Added EMA90 ModbusMap, Defining the Device Template (ModbusMap), Adding IEC 60870-5-101 Slave Application, Inserting the Control Center of IEC 60870-5-101 Slave, Inserting the SNMP Application, Monitoring IEC 61850 IEDs Connection Status With SNMP, Inserting a PASCC Application to Full Server System, Inserting Control Center to PASCC Application, Inserting a PASCC to a New System (DIP)
• Creating a Full Server Computer
• Creating an IEC101-Master to connect the RTU
• Importing the RTU file
• Communication IEC 60870-5-103
• Communication OPC-Client (based on COM/DCOM)
• Communication OPC-XML-Server
• SICAM PAS Configuration (Topology Management, Filtering, Topology Tree Structure, Selection of Signals for Each Sub-Level, Modbus (Measuring) Signals
• SICAM PAS Configuration (Automation (Soft PLC), Logic Processing with CFC, Info to / Com from SoftPLC (Mapping), Creating New CFC Program, Connection of Source and Destination Variables
• Routing messages from/to SoftPLC
• Renaming duplicated message
• Creating a CFC file
• CFC block
• Inserting Variable into interconnection column
• Grouping with a “PAS_GROUPI”-Function Block
• Converting a Counter Differential Value to a Counter Final Value
• Interlocking
• Run Sequence
• Online Mode
• Watchlist
• CDA (Control Data Analyzer) Necessary settings
• Mapping an output to CDA
• Human-Machine Control Center Mapping, Exporting of HMI1 Interface
• How to select a group of messages
• Normalization
• Create a Normalization Template
• Scaling a measured value
• Normalization as a multiple-used template
• Assignment of normalization in Mapping
• Adaptation of transformer tap position indications
• Archiving Configured Project, Un-archiving Project

SICAM PAS UI-Operation

• Updating the System
• Symbols in the tree view
• Operation – functions
• Exporting messages from PAS UI Configuration

SICAM PAS Value Viewer

• Mapping shows the Information Volume
• SICAM PAS Value Viewer
• The properties of a message
• Control function
• Testing data
• Important columns
• ValueViewer: Communication diagnostics

SICAM PQS

• Fault recording with SICAM PQS
• SICAM PQS – Functional Overview
• Incident Explorer
• PQ Explorer
• Grid Code Viewer
• Report Browser
• PQ Inspector

SCADA

• IEC 60870-5-101, the telecontrol profile
• IEC 60870 – 5 – 101 The most important features
• IEC 60870 – 5 – 101 telegram structure
• Type Identification in monitoring direction
• Type Identification in command direction
• Type Identification for organization objects
• Type Identification for parameters
• Quality Information
• IEC 60870-5-102, the counter profile
• IEC 60870-5-103, the IED/protection relay profile
• Creating an IEC103-Master and Interface
• Communication Parameters
• Data Units specified in IEC 60870-5-103
• Info Identification in PAS for IEC 60870-5-103
• IEC 60870-5-104, the network profile (based on 60870-5-101)
• Software IECTEST
• Settings for IEC 60870-5-104
• IEC 60870-5-104 Slave – Control Center Simulation

SICAM SCC

• Export of HMI information from SICAM PAS
• Check the content of a PXD file
• Introduction to SICAM PASCC Control Center
• SICAM PASCC Control Center ‐ Overview
• SIMATIC WinCC
• SICAM PASCC Components
• SICAM PASCC Communication
• SICAM PAS Wizard
• WinCC Explorer
• Graphic Objects Library
• Switchgear Objects
• Schwitchgear Objects – Styles and States
• Alarm Logging – Message List
• Control & Monitoring
• WinCC & PASCC Licensing
• SIMATIC WinCC / SICAM PASCC Installation Steps
• Transfer The License Keys
• SIMATIC WinCC / SICAM PASCC Time Synchronization & NTP
• SICAM PASCC Starting The WinCC/PASCC Software
• SICAM PASCC Creating/ Opening a New Project
• SICAM PASCC Defining The Computer Properties General Tab, Startup Tab, Parameters Tab, Graphics Runtime Tab
• Adding a Communication Driver
• Connection Properties
• Entering the IP Address of SICAM PAS Servers
• SICAM PAS Wizard Opening
• Error Log File of SICAM PAS Wizard
• Select a Right SICAM PAS Protocol Suite
• Set PAS IP Connection
• Importing of the Sample Pilot Project .pxd File
• Redefining the failed Sample Project
• Checking Structure Tags of a New Project
• Structure Tag Elements
• Symbol Library
• SICAM Administrative Internal Tags
• Schwitchgear Objects – Tag Connection
• Design of Graphical Objects
• Switchgear Objects – Sychro-Check
• Alarm Logging – Events & Alarms
• Alarm Logging – Message Queue & Mes Ack Tags
• Tag Logging – Measured Values
• WinCC Horn Tools– Sound File
• Tag Logging – Archive Configuration
• Trends Picture
• Topological coloring
• Event List
• Alarm List
• Protection Message List
• Horn, Alarm Acknowledgment
• Creating an Event List in the Graphics Designer
• How to scale analog values
• User Administrator
• Login-Function via key combination
• Login via button
• Defining level of rights
• Entering the requested right
• Displaying the current operator
• Report Designer – Print Job
• Project Archive, Duplicator
• Automatic Start of WinCC Project
• Recpro
• Setting Up SICAM PAS Recpro
• SICAM VALPRO
• SICAM VALPRO – Graphic functions
• Bay Blocking

Redundancy

• Redundancy Definition
• Dependency Definition
• Redundant Communication
• System Switchover
• Manual Switchover
• Redundant “Full Server – DIP” Configuration
• Configuring a Redundant System
• Transferring a database to a Redundant System
• Status indication in a redundant system
• Single Channel IEDs
• IED Redundancy
• System Redundancy
• Communication with Control Center
• Control Center with one interface
• Control Center with 2 Interfaces
• Communication via WAN Network

Example: Switching Authority in SICAM PAS

• Switching Authority Group
• Routing to PAS CC
• Switching Authority Tag
• SICAM PAS CC symbol library
• Configuring Button Switching Authority
• Test the Switching Authority

OPC Communication

• What is OPC ?
• OPC Applications
• Overview of OPC data flow
• OPC Server & Client
• Config OPC Server in the SICAM PAS UI-Configuration
• OPC Client
• OPC-XML-Server
• Difference between the OPC-XML-Server with the previous OPC
• Creating OPC XML Server in SICAM PAS

Additional Information

• Automation License Manager
• Tasks to be started with the Runtime
• Language and Key Disabling
• Graphics Runtime
• Data structure (monitoring/control direction)

Hardware Setup for SIEMENS SAS training

• SIPROTEC 5 Multifunction Relay IED
• Fiber optic to Ethernet converter
• Ethernet Switch
• PLC S7-1200
• PC (IEDScout, DIGSI4, DIGSI5, SICAM PAS, WinCC, TIA Portal, SICAM SCC, Wireshark, IEC61850 Configurator …)