- Course Code #21
- Siemens Bay Control Unit (BCU)
- Course Creation: July 2026
- Instructor: Dr. Saeed Roostaee
- saeed61850@gmail.com
- Elec-Engg.com
- ProtectionRelay.com
Prerequisites (Mandatory)
This is an advanced training course. To successfully follow the lessons, you must complete the following prerequisite courses before enrolling:
These courses provide the essential knowledge required for this training. Enrollment without the prerequisite knowledge is not recommended, as many concepts will not be explained again.
Recommended Learning Path
- DIGSI 4
- DIGSI 5
- Industrial Communication
- IEC 61850 Configuration
- Substation Automation System (SAS)
- Siemens Bay Control Unit (BCU) ← This Course
- SICAM PAS
- SICAM SCC
Important: The Siemens Bay Control Unit (BCU) course is compulsory before taking the SICAM PAS and SICAM SCC training packages. These courses are designed as a continuous learning path, with each course building on the knowledge gained in the previous one. Skipping any prerequisite course may make it difficult to understand the advanced topics covered in later courses. You can enroll in this course. If you have completed all the mentioned courses, please contact us and enroll in this course.
Course Topics:
- SAS fundamentals
- Siemens SAS architecture
- SIPROTEC 4 BCU engineering
- SIPROTEC 5 BCU engineering
- Real-world case studies
It also provides a natural bridge to your next courses on SICAM PAS and SICAM SCC, making the learning path continuous.
suggested topics:
Course Topics
Chapter 1: Course Introduction
- About This Course
- Introduction to Siemens Bay Control Unit (BCU)
- Course Objectives and Learning Outcomes
Chapter 2: Substation Automation System (SAS) Overview
- Introduction to Substation Automation Systems
- SAS Architecture (Process, Bay, and Station Levels)
- Bay Concept and Bay Architecture
- Communication Models
- Network Topologies
- SAS Components and Information Flow
Chapter 3: Siemens Substation Automation System
- Siemens SAS Overview
- Siemens SAS Architecture
- Siemens SAS Components
- SICAM Product Family
- RUGGEDCOM Industrial Ethernet Network
- How a Siemens SAS Works
- Practical Communication Flow in a Siemens SAS
Chapter 4: SIPROTEC 4 Bay Control Unit (BCU)
- Hardware Overview
- Device Interfaces and Communication Modules
- DIGSI 4 Engineering
- IEC 61850 Configuration
- Measurements and Metering
- Circuit Breaker Control
- Disconnector and Earthing Switch Control
- Bay Interlocking
- Switching Devices
- Automation Logic (CFC)
- GOOSE Communication
- MMS Communication
- Event and Disturbance Recording
- Testing and Commissioning
- Practical Engineering Examples
Chapter 5: SIPROTEC 5 Bay Control Unit (BCU)
- Hardware Overview
- DIGSI 5 Engineering
- Device Initialization
- IEC 61850 Configuration
- Bay Control Functions
- Measurements and Metering
- Circuit Breaker and Disconnector Control
- Interlocking
- Switching Devices
- Automation Logic
- GOOSE Communication
- MMS Communication
- Diagnostics
- Testing and Commissioning
- Practical Engineering Examples
Chapter 6: Practical Case Studies
- Real Substation Bay Engineering
- Configuration of a Complete Bay
- SCADA Integration
- Communication Testing
- Troubleshooting and Best Practices