Course on: Sepam Protection Principles

Course definition   

TARGETS 

  • Marketing function
  • Protection technician
  • Product Application Engineer (PAE)
  • Application engineer 

Objective:  

  • Able to understand and choose the protection functions available in the Sepam range offer in compliance with standards and industrial MV network applications. Theoretical introduction to Sepam series 20, 40, 80 bringing into operation.  

Content

  • Introduction of MV dist ibut ion networks, Generation, transmission and distribution systems, Substation, industrial and building environments, Typical loads and generators, The configuration of MV networks, faults, Neutral earthing systems. Introducing MV protection principles: The protection functions, The principles of discrimination, Measurement sensors. Study of an MV industrial network and use of the protection plan: Calculation/ verification of fault current, Choosing protection function according to the application (substation, busbar, transformer, etc …) 

PDF Files:00-Sepam Protection Principles.
01-Plan_Network structures.
02-Plan_Network and machine faults.
03-Plan_Source of Isc.
04-Plan_Symmetrical components.
05-Plan_Calculation of Isc.
06-Plan_Calculation of Isc_exercises.
07-Plan_Earthing systems.
08-Plan_Earthing systems_exercises.
09-Plan_CTs.
10-Plan_CTs_exercises.
11-Plan_Irsd measurement.
12-Plan_LPCT.
13-Plan_VTs.
14-Plan_Vrsd measurement.
15-Plan_Prot funct general charact.
16-Plan_IDMT curves_exercises.
17-Plan_Discrimination.
18-Plan_ANSI 67.
19-Plan_ANSI 67N.
20-Plan_Differential_87.
21-Plan_ANSI 87M.
22-Plan_ANSI 87T.
23-Plan_ANSI 64REF.
24-Plan_ANSI 49RMS.
25-Plan_Network protection.
26-Plan_Busbar protection.
27-Plan_Transformer protection.
28-Plan_ANSI 24_transformer.
29-Plan_ANSI 26-63.
30-Plan_Motor protection.
31-Plan_ANSI 40_motor.
32-Plan_ANSI 78PS_motor.
33-Plan_Synchronous generator protection.
34-Plan_ANSI 21B.
35-Plan_ANSI 24_generator.

To download: contact us 

23 thoughts on “Course on: Sepam Protection Principles”

  1. Hi Sir
    1- Is this course prepared by you or its a technical catalogues from the manufacture?
    2- can I pay with master card?

    1. Protection Engineer

      Yes, please check your email for all packages with a special offer
      DIGSI 4 (3 hrs)
      DIGSI 5 (7 hrs training)
      IEC 61850
      ETAP for protection Engr
      PSCAD for protection Engr
      ABB PCM 600

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top