MiCOM error codes

Error Code	Action to be Taken
0X83810002	Check Software is loaded correctly into the relay. Upgrade the Firmware.
0X83818001	Replaced Analog Opto Card, Ethernet Card, Relay Upgraded,& found Healthy & OK
0x0c0e0000	The relay card is defective. Replace the Relay card.
0x0c250018	Either the Processor Card or Analog Input Card is defective. Replace the Processor card or Analog Input Card. If the problem persists replace both cards.
0x0c0ddb1c	The Analog Input card is defective. Replace the Analog Input card.
0x0c170017	The processor Card is defective. Replace the Processor card.
0x0c0ddb15	The Analog Input card is defective. Replace the Analog Input card.
0x8c810000	The Analog Input card is defective. Replace the Analog Input card.
0x0c170018	The processor Card is defective. Replace the Processor card.
0x83810007	The processor Card is defective. Replace the Processor card.
0x81170000	The co-Processor Card is defective. Replace the Co-Processor card.
0x0c160011	The processor Card is defective. Replace the Processor card.
0x0cc020041	Model Number mismatch. Check the Model Number & reload the Model Number and Serial Number once again to the relay.
0x838b0808	Opto card No.3 is defective. Replace Opto card No.3
OX838b2008	Opto card No.2 is defective. Replace Opto card No.2
OX83818001	Replaced CT/VT Module& Opto card 2 & 3 Relay Tested, Measured & found Healthy & OK.
0x838188001	Replaced CT/VT Module, Relay Tested, Measured & found Healthy & OK.
0x02070be0	The processor Card is defective. Replace the Processor card.
0x0202000e	Replaced CPU card, Analog input card, Opto card, hood, and backplate
0x0c0ddb1c	Replaced CPU card. Relay tested in Automatic Test bench. Found OK. Relay energized for 48 hours. Since the CPU card is defectively unable to extract & download the customer’s settings & PSL.
0x812A0003	The Analog Input card is defective. Replace the Analog Input card.
0x0c220028	The processor Card is defective. Replace the Processor card.
0x0c0ddb1c	The Analog Input card is defective. Replace the Analog Input card.
0x0c1600b3	Relay card No.3 is defective. Replace Relay card No.3
0x351afe03	Ethernet Card is defective. Replace Ethernet Card.
0x0c1600b1	Relay card No.1 is defective. Replace Relay card No.1
0x0c1600b2	Relay card No.2 is defective. Replace Relay card No.2
0x0c0ed920	Either the Processor Card or Analog Input Card is defective. Replace the Processor card or Analog Input Card. If the problem persists replace both cards.
0x08118000b	Opto Card is defective. Replace Opto card.
0x020b0b4a	The processor Card is defective. Replace the Processor card.
0X0C140002	The processor Card is defective. Replace the Processor card.
0x8c01000.	The power Supply Card is defective. Replace the Power Supply card.
0x0c020020	The processor Card is defective. Replace the Processor card.
0x81180002	The processor Card is defective. Replace the Processor card.
0x07020020	Communication card is defective. Replace Communication card.
0x0c020028	Either Processor Card or Analog Input Card is defective. Replace Processor card or Analog Input Card. If the problem persists replace both cards.
0X811E0000	Either Processor Card or Co-processor Card is defective. Replace Processor card or Co-processor Card. If the problem persists replace both cards.
0x82021C98	Co-Processor Card is defective. Replace Co-Processor card.
0x8c8100000	Anolg Input card is defective. Replace Anolg Input card.
0X8118002	Anolg Input card is defective. Replace Anolg Input card.
0x0c0ddb15	Opto Card is defective. Replace Opto card.
0x8c18000	Replaced Transformer , relay tested and calibrated and found in order.
0x0c1600d00	Either Processor Card or Analog Input Card is defective. Replace Processor card or Analog Input Card. If the problem persists replace both cards.
0x1c1200f6	Processor Card is defective. Replace Processor card.
0x83818000	Replaced CT/VT module from the P743 relay Excess stock to the defective relay. Relay tested from CP dept. Found OK.
Error code 0x0C220028	indicates that the IED configuration – based on the MCL file downloaded to the relay – cannot be initialised in flash memory. This can occur if the MCL file being downloaded to the relay is too large (>32kB) or the MCL file is corrupted during download.

What does the error code 0x0C170017 on a MiCOM P14x

What is the meaning of error code 0x0c170018

What does this Micom hex error code mean?
Error Code During Operation – GE MiCOM P40 Agile