IED Connectivity Package – Electrical Engineering

ABB Relion 600 series has a wide range of applications. PCM 600 is the software to config these relays. We have prepared a comprehensive training package that includes prerequisites, the main training videos by Dr. Saeed Roostaee, and supplementary files attached to the course. Please find the following details and offers to get this awesome package.

Prerequisites (Demo videos available at the end of this page)

Since time matters, we’ve gathered helpful videos and slides and mix them with understandable oral explanations for helping you in time-saving & convenience. These files are attached to the training as Prerequisite A and Prerequisite B. It is suggested to watch these prerequisites before starting the main training.

Prerequisite A: (55 min)

Pre-A01 (length: 7:24) This chapter gives an overview of the PCM 600 functionality as well as how to get the software
Pre-A02 (length: 10:54): Communication and Project setup, establish communication between the physical IED and PCM 600, Manage project with PCM 600, Hardware configuration
Pre-A03 (length 12:55): How to use the Application configuration tool in the PCM 600
Pre-A04 (length 3:23): How to use the Graphical Display editor tool in the PCM 600
Pre-A05 (length 2:00): How to use the Read and write the tool in the PCM 600
Pre-A06 (length 4:38): How to use the user management in the IED and PCM 600
Pre-A07 (length 6:41): IED online monitoring, event viewer, signal monitoring, disturbance handling, and scheduler in the PCM 600
Pre-A08 (length 2:34): How to use the signal matrix editor tool in the PCM 600
Pre-A09 (length 4:27): Parameter setting tool in the PCM 600

Prerequisite B: (80 min) (sample at the end of this page)

Pre-B01 (length 3:24) Opening update manager and installing the updates available
Pre-B02 (length 2:42) Opening PCM 600, creat project, and read all from the IED
Pre-B03 (length 5:54) PCM 600 option settings
Pre-B04 (length 7:21) PCM 600 user management settings
Pre-B05 (length 2:12) Migrate configuration
Pre-B06 (length 1:14) Compare hardware configuration
Pre-B07 (length 0:58) Writing configuration into IED
Pre-B08 (length 5:17) Interlocking between application configuration and signals matrix tool in PCM600
Pre-B09 (length 3:24) Signal matrix
Pre-B10 (length 11:01) Parameter setting
Pre-B11 (length 6:58) Graphical Display
Pre-B12 (length 4:59) Signal monitoring
Pre-B13 (length 6:53) Disturbance handling
Pre-B14 (length 4:19) Scheduler in PCM 600
Pre-B15 (length 4:16) IED compare
Pre-B16 (length 1:04) Technical key in ABB relay IED
Pre-B17 (length 3:15) IEC 61850 GOOSE configuration in PCM 600
Pre-B18 (length 3:21) IEC 61850 Report configuration in PCM 600 (Client-Server)
Pre-B19 (length 1:37) SCL version in the IEC 61850 Ed1 and IEC 61850 Ed2 of an ABB IED relay

Main Training (Demo videos available at the end of this page)

ABB PCM 600 training by Dr. Saeed Roostaee (3 hours in English)

Part 1 (length 23:28)/ ABB relays history, PCM and connectivity pack installation, create project structure based on IEC 61850, different ways to add IEDs (ABB and non-abb relays), different steps to config a relay without reconfiguration and with reconfiguration, how to use Xrio format to set the parameters
Part 2 (length 21:05)/ hardware configuration, config analog inputs (voltage and current), application configuration, function blocks and naming based on IEC 61850 standard, IEC symbol, and ANSI code, config a simple overcurrent function,
Part 3 (length 32:32)/ config a simple distance protection function (SMAI, SMBI, SMBO, ZMMAPDIS, ZMMPDIS, FUFSPVC, …), configure sample signals based on the 7SA diagram (diagram is discussed and configured in the DIGSI 5 training pack)
Part 4 (length 19:16)/ config a simple 67N protection function, config disturbance reports (ARDAR, BRDAR, LED)
Part 5 (length 05:00)/ Parameter settings, XRIO format
Part 6 (length 44:13)/ product guide for a pre-configured distance relay, and ordering, modify pre-configured distance relay based on our projects, Analog inputs (current &s for voltage), Distance Protection functions, and Communication logics
Part 7 (length 39:54)/ Current and Voltage protection functions and Earth Fault Protection Communication logic, Circuit Breaker Autorecloser and Tripping logics, Signal Logic and General IED functions, Virtual Binary inputs and outputs, Disturbance report analog and binary inputs

Trainer: Dr. Saeed Roostaee (Profile)

Update: 26 July 2021

Working online with relay and testing protection functions (Length: 106 minutes)

Download PCM 600 training pack

Supplementary Files

To save your time, we’ve also gathered important related files/videos/software as supplementary training files. These files are attached to the training. Please+6 find the following details for the attached Supplementary training files.

Supplementary training files – Part 1 (4 hrs video)

01 ABB Relion 611 series.mp4
02 Feeder Protection Relay virtual training ABB REF615.mp4
03 How to connect to a relay and find its information in PCM600.mp4
04 ABB REF630 hardware overview.mp4
05 ABB REF 630 Wiring and connection.mp4
06 ABB REF 630 Factory Reset.mp4
07 REF 615 Physical connection.mp4
08 Relion REF 615 from panel.mp4
09 Connect REF 615 to PCM600.mp4
10 REF 615 experimental setup with binary input and output connection.mp4
11 How to set display contrast in the ABB Relion 600 series.mp4
12 How to set CT and PT ratio from local HMI in the ABB Relion 600 series.mp4
13 How to set CT phase and CT earth fault in the Relion REF 615.mp4
14 Testing & commissioning of the ABB REF615.mp4
15 Relion 670 series.mp4
16 How to add hardware modules to Relion 600 series.mp4
17 How to find ABB Relion Order Specific File.mp4
18 ABB Relion 670 and 650 series features.mp4
19 RET 650 Transformer Protection.mp4
20 REF 615 Operated and reset function.mp4
21 RED 670 Operated and reset function.mp4
22 How to check fault recorder from local HMI in the ABB Relion 600 series.mp4

Supplementary training files – Part 2 (5 hrs video)

00 How to Download PCM 600.mp4
01 How to install PCM 600.mp4
02 Installing ABB PCM600 and getting start.mp4
03 PCM 600 version 2.4 installation.mp4
04 Introduction to ABB PCM 600.mp4
05 ABB Relion connectivity package and update manager.mp4
06 PCM 600 installation and getting started with the configuration of ABB REF 615.mp4
07 Create a new project in ABB PCM 600 offline mode.mp4
07 Create a new project in ABB PCM 600 online mode.mp4
09 Configuring ABB PCM 600.mp4
10 File Management in PCM600.mp4
11 Project Import and Logic config in PCM600.mp4
12 PCM600 Environment.mp4
13 Read parameter and config file from Relion 670 IEDs.mp4
14 Write parameter and config to Relion 670 IEDs.mp4
15 Set technical key on PCM600.mp4
16 PCM 600 License Update Tool.mp4
17 PCM 600 Error IED Configuration Type not match.mp4
18 PCM 600 Error SQL server instance not found in PCM60.mp4
19 REF 610 Relay Datasheet.mp4
20 Signal Matrix Tool in PCM 600.mp4
21 Parameter Settings Tool in PCM 600.mp4
22 Change input label in PCM600.mp4
23 Check function in PCM600 online mode.mp4
24 Change binary input signal in PCM 600.mp4
25 Signal and event monitoring in PCM 600 online mode.mp4
26 Event Viewer Tool in PCM 600.mp4
27 Disturband Handling Tool in PCM 600.mp4
28 Fault record in PCM600.mp4
29 REF 615 online mode.mp4
30 Metering value setting in PCM 600.mp4
31 Test mode in ABB relays.mp4
32 Draw display in PCM 600.mp4
33 ABB Vacuum CB.mp4
34 ABB 145 KV SF6 CB.mp4
35 ABB CB Manual and wiring diagram.mp4
36 How to change Trip Circuit Supervision setting from REF 615 local HMI.mp4
37 Breaker counter in PCM 600 and Relion 600 series.mp4
38 LR or Local remote control in ABB Relion.mp4
39 Reset ABB relay LEDs in PCM 600.mp4

Supplementary training files – Part 3 (8 hrs video)

01 REF 615 relay overcurrent configurations
02 RTD configuration for REM 620 Relay
03 How to check RTD for REM 620
04 How to calculate thermal overload trip time
05 How to do Configuration in PCM600 REF615 configuration ABB relay configuration
06 How to enter setting to protection functions in PCM 600
07 How to do Configuration in PCM600 REB 611 configuration ABB bus bar relay Configuration
08 ABB Distance Relay Configuration REL 670 part 1
09 ABB Distance Relay Configuration REL 670 part 2
10 ABB Distance Relay Configuration REL 670 part 3 (Fault locator)
11 ABB Distance Relay Configuration REL 670 part 4 (Relay setting)
12 Testing ABB RED670 Communication
13 Testing ABB RED670 (Configure and settings)
14 Distance relay RED 670 Line differential protection
15 SOTF DLD Timing Test
16 Power swing blocking RED 670
17 RED 670 Relay testing
18 Testing Distance relay RED 670 Line differential protection
19 Distance relay RED 670 Line differential protection blocking scheme
20 Distance relay Current reversal
21 Distance relay RED 670 Line differential protection Current reversal
22 How to do effective testing in ABB Relion® 670 and 650 series

Supplementary training files – Part 4 (2 hrs video)

01 Goose config between two ABB relays in PCM 600.mp4
02 Goose config between RIO Remote input-output and an ABB relay in PCM600.mp4
03 Goose Config between ABB and non-ABB relays.mp4
04 Goose config between Micom and ABB Relays.mp4
06 Goose config in a multivendor areva.mp4
07 Goose Error code 32 on ABB relay.mp4
08 Prepare SCD file with ABB RTU client.mp4
09 Convert IID file into CIDfile.mp4

Supplementary training files – Part 5 (PDFs)

PCM 600 Getting started guides
Manuals for the IED 670 series
Connection diagrams: REB670 / REC670 / RED670 / REG670 / REL670 / RES670 / RET670 / RET670
670 series Manuals (Engineering/ Installation/ Operation)
670 series Communication Protocol Manuals (IEC 61850, LON, SPA
IEC 61850 data model description
Accessories for 670 series IEDs Product Guide
Bay control REC670 Manuals (Application, Commissioning, Product Guide, Technical)
Busbar protection REB670 Manuals (Application, Commissioning, Product Guide, Technical)
Generator protection REG670 Manuals (Application, Commissioning, Product Guide, Technical)
Line differential protection RED670 Manuals (Application, Commissioning, Product Guide, Technical)
Line distance protection REL670 Manuals (Application, Commissioning, Product Guide, Technical)
Phasor measurement unit RES670 Manuals (Application, Commissioning, Technical)
Transformer protection RET670 Manuals (Application, Commissioning, Product Guide, Technical)

Supplementary training files – Part 6 (Project files)

670 series Configuration Templates (REB670 / REC670 / RED670 / REG670 / REL670 / RES670 / RET670)
Pre Configuration pcmi files(REB670 / REC670 / RED670 / REG670 / REL670 / RES670 / RET670)