Siemens DIGSI V4.93 Setup ended prematurely.
Siemens DIGSI V4.93 Setup Wizard ended prematurely because of an error.
Siemens DIGSI V7.30 Setup ended prematurely.
Siemens DIGSI V7.30 Setup Wizard ended prematurely because of an error.
Siemens DIGSI V4.92 SP1 Setup
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that The program to be upgraded exists on your computer and that you have the correct upgrade.
Read operation failed/canceled
PCM IED configuration may be in an inconsistent state. Please check more detailed information from Read/Write report. Re-read is highly recommended.
No device can be found. Please adjust the parameters and try again.
Name: Connection 1
Error: Cannot read data from the device
The application has encountered a problem and needs to close.
Would you like to restart the application?
The object can not be deleted.
The object is used in IEC 61850 communication flow and can currently not be deleted.
Differences during comparison of data
Settings: Inputs/Outputs: Direct
Login to AcSELerator RTAC Database