Sample discussion in our whatsapp group, Join Us for free discussion

IED 61850 data modelling in PCM600 does not match the IED application .This might have been caused because a faulty SCD file was imported to PCM600.

To rectify the situation ,please import the SCD file matching the IED cinfigurations or re-create the incomplete Function Blocks in the Application Configuration .The incopplete Function Blocks are.

Enter Device Password

Enter Device Password
Please type the password for device

Update short product code(TNS) list (0000:000004)

Update short product code(TNS) list (0000:000004)
Failed to connect to server
Check your internet connection or again later.

An HTTP proxy is configured on this computer.
for more information about proxy settings,refer to the section Network Environment in the online help.

Object Properties

Object Properties
The given VD address is invalid lt will be replaced by an unused VD sddress.

H(active with voltage)
L(active without voltage)
-(Not configured)

Unable to initialize SEL Compass because of error:Unable to connect to databas
Please contact SEL Customer Service at 1

Siemens DIGSI 5 V7.80 Setup

Siemens DIGSI 5 V7.80 Setup
There is a problem with this Windows Installer package.
A DLL required for this install to complete could not be run.Contact you support personnel or package vendor

Connection failed

Connection failed
Failed to connect to device 7UT82 via integrated Ethernet interface

Windows cannot access the specified device,path or file . You may not have the appropriate permissions to access the item

Siemens DIGSI V4.93 Setup

Siemens DIGSI V4.93 Setup
The serial number that you have entered is invalid.
Enter a valid serial number

Sample discussion in our whatsapp group, Join Us for free discussion

Parameter Set Transmission with startup

Parameter Set Transmission with startup

Metered and statistical values and the buffers are deleted during transmission of the Parameter set.

The avtive Parameter group will be Parameter group A.
Do you want to continue with transmission?

Transfer parameter set

Transfer parameter set
The parameter set cannot be transferred to the device

The reason for this is that the parameter for the EN100 module has not yet been updated after changing the IEC61850 system interface.

To do so,open the “update”property page of the IEC61850 station and update all parameter sets.A transfer to the device now words again

Configuration Wizard

Configuration Wizard
ABB 670 series IED Connectivity package Ver. 3.1.2.0 does not Connectivity package

ZIVercomPlus

ZIVercomPlus
Some settings received.Missing:2979

ZIVercomPlus

ZIVercomPlus
Error requesting settings

MAP120 Error

MAP120 Error

DeviceDocCat:
Loading of device model failed not supported by this device

Displying the overview

Displying the overview
Cannot read file SAMPLES\FAULT\FAULPROT.SFP

Siemens DIGSI V4.91 Setup

Siemens DIGSI V4.91 Setup
The Siemens DIGSI V4.91 diwnload Version requires an already installed DIGSI 4 on the machine.Setup will not continue

Sample discussion in our whatsapp group, Join Us for free discussion

MiCOM S1 Agile password

MiCOM S1 Agile password
Enter MiCOM S1 Agile Password
Please type the password.

ETAPlnstaller

ETAPlnstaller
Cannot launch Setup .exe program at
{C:\Users\acer\Desktop\ETAP v 16.0.0\ETAPSETUP\Setup.exe}
Error Code (2)

Identify Relay

Identify Relay
Relay Password

Error generating IEC61850 data

Error generating IEC61850 data
The fault value file could not be loaded

Extracting

Extracting
Operation failed.Please use Show Details button to get information about the problem.

Courier instance initialisation

Courier instance initialisation
C32CS Instance COMlnstance Failed to open port

RET615A-Reading order code

RET615A-Reading order code
Order code HBTDBABANDA1ANN21G invalid

MiCOM S1 Studio password

MiCOM S1 Studio password
Enter MiCOM S1 Studio password

Graphics Designer

Graphics Designer
The server is currently not available!
You cannot edit any actions at this time!

EnerVista UR Setup

EnerVista UR Setup
Device data could not be retrieved!
Please verify device connection.
Do you want to retry?

Sample discussion in our whatsapp group, Join Us for free discussion

Open Project

Open Project
Connectivity Package module information is not available for REx670
3.2.5.0

SIGRA

Expired
SIGRA
The evaluation period for the trial version is over.Please contact Siemans for a full version.

Transfer/activate settings

Transfer/activate settings
Parameter set activation aborted.
Reason: a fault is currently active

Digsi4

Digsi4
ActivateParSet0 failed

Siemens DIGSI 5 V7.50 Setup

Siemens DIGSI 5 V7.50 Setup
Windows update KB 3033929 is a prerequisite for the installation of DIGSI 5.
Install this update by either running Windows updater or downloading it from the Microsoft Internet site,If necessary ,contact you system administrator.

Windows update Standalone Installer

Windows update Standalone Installer
Security Updater for Windows (KB3033929) is already installed on this computer.

Metered connection

Metered connection
If you have limited data plan and want more control over data usage,make this connection a metered network.Some apps might work differently to reduce data usage when you`re connected to this network.

Easergy Studio password

Easergy Studio password
Enter Easergy Studio Password
please type the Password

Refresh device data (0001:000007)

Refresh device data (0001:000007)
To enable lifelist-device import,install protocol DDD V07.50.12

3100:32852

3100:32852
No suitable L0 parameter set can be found for the device with parameter set version V04.76.01
There is an L0 parameter set of version V4.76.02 in folder
C:\Siemens\DIGSI4\Manger\P7DI\Geratyps\V4_76.
The process is aborted.