Sample discussion in our whatsapp group, Join Us for free discussion
Siemens DIGSI V4.93 Setup ended prematurely. Siemens DIGSI V4.93 Setup Wizard ended prematurely because of an error
Siemens DIGSI V7.30 Setup ended prematurely. Siemens DIGSI V7.30 Setup Wizard ended prematurely because of an error
Siemens DIGSI V4.92 SP1 Setup The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing,or the upgrade may update a different version of the program.Verify that the program to be upgraded exists on your computer and that you have the correct upgrade
Read operation failed/cancelled PCM IED configuration may be in an inconsistents state.Please check more detailed information from read/Write report .Re -read is highly recommended.
Error No device can be found .Please adjust the parameters and try again Name: Connection 1 Error: Cannot read data from device
Test Connection Connection Failed
DIGSI 5 The application has encountered a problem and needs to close Would you like to restart the application?
Object can not be deleted The object is used in IEC 61850 communication flow and can currently not be deleted
Differences during comparison of data MLFB differs
Additional information DIGSI/Modem Rear Port Protection Interface 1
Load changes to device(0001:000040) Failed to load configuration Load configuration of plug and play devices is not allowed as relevant information like GOOSE connections to other devices would be lost.Use the project where the device was originally configured in
I:\newfolder.a\newfolder.e\newfolder.d\newfolder.c\newfolder.b\chrom .exe Windows cannot access the specified device,path or file,you may not have the appropriate permission to access the item
Quick Connect Quick Connect EnerVista 3 Series Setup to a 350/339/345 Device
Sample discussion in our whatsapp group, Join Us for free discussion
No DIGSI 5 license found. A valid license could not be found on this computer.Either no license is installed or a trial/emergency license has expired.
To start DIGSI 5, select no of the options below: start DIGSI 5 Compact(no license required). Install a DIGSI 5 Standard or premium license on this computer. Start testing DIGSI 5 premium for 30 days on this computer.
IEC 61850 System Configurator The application has stopped unexpectedly.
STEP 7 Start(256:132) STEP 7 has found a problem with the Automation License Manager.The application is closing .Please reinstall the Automation License Manager.
Common Read IEC61850 configuration cannot be read from IED due to Mismatch between PCM and IED Technical Key.IED Technical Key in PCM is: AA1J1Q02A1 where as in IED is: AA1J1Q01A1 .Do you want to continue without reading IEC61850 configuration?
STEP 7 Start (256:132) STEP 7 has found a problem with the Automation License Manager. The application is closing Please reinstall the Automation License Manager.
Simens DIGSI 5 V7.90 Setup Siemens DIGSI 5 V7.90 requires a screen a resolution of 1024?768 or higher. The screen resolution of you systems is not high enough.
Simens DIGSI 5 V7.90 Setup Please note that Siemens doesnot officially support the installation and operation of Siemens DIGSI 5 V7.90 on the version of Microsoft Windows installed on this computer . To proceed anyway ,please confirm with OK and continue with the setup.Refer to the Siemans DIGSI 5 V7.90 product information for a full list of supported operathing systems.
Open project TIA Portal V13 SP1 Open project The project has a TIA portal project version V13 SP1. To use this project with TIA portal V15.1, it is upgraded to TIA portal project version V15.1.
Chang were noticed in the IEC61850 parameters. If you accept the changes also update the IEC61850 station when you have processed all the devices. Be careful! If you reject the changes,the last changes in the parameter set are also rejected. Accept changes?
Open system configurator You must select a storage location for the new IEC 61850 station description(SCD) or assign an existing IEC 61850 station description(SCD). Do you want to continue?
Open Object (3100:32915) This station has no assigned communicators from the current project yet. Do you want to open the station anyway? Note: To add Communicators,select “No”. Then open in the manager the properties of the selected IEC61850 station.
Project copied/moved When copying DIGSI4 projects containing 1 or several IEC 61850 station configurations, the corresponding IEC 61850 projects are not copied automatically. Consider the corresponding hints in the help.
IEC station 1(0831:000010) No IEC 61850 System Configurator Project found for the scd file specified.
Open project(0100:000500) Opening the project failed Upgrade failed. For more information , see the log file. If the project still cannot be upgraded. please contact Siemens Customer Support.
Register IEC 61850 System Configurator Project(0831:000009)
The IEC satation must be assigned to an IEC 61850 System Configurator project.
In order to continue working with yous IEC configuration ,the IEC Station must be assigned to the project you previously created with the IEC 61850 System Configurator.
The possibilities of interactive training with video are endless. Such training can be accessed whenever and wherever it is needed, as often as is necessary.It is highly cost-effective, reduces travel, and time-saving. We provide professional video training package on SIPROTEC and DIGSI
High Quality Video (Full HD – 1080p)
Free life time technical support with quick response (WhatsApp, E-mail, Telegram and Remote technical support if needed
Share the valuable experiences in the field as a user not as a promoter
Short videos in English with easy-to-digest content
Share the most up to date experiences, news and documents relevant to each course
DIGSI 5 is for configuring, parameterizing, and operating SIPROTEC 5 protection, combination, and bay devices. With a PC or a notebook, you can parameterize the devices via the interfaces and export and visualize the fault data. DIGSI 5 comes in different variants (Compact, Standard, and Premium) that provide different functionalities.To use DIGSI 5 Standard and Premium, you need a license key for each computer you are running DIGSI 5 on. If you execute the software without a license key, it will be always available as DIGSI 5 Compact edition or as a Trial version for 30 days. The licenses are provided on USB sticks.
DIGSI 5 V7.80 needs high performance specifications of the used operating system version. Therefore, it is recommended to install DIGSI 5 V7.80 on Intel® Core™ i5 with 16 GB of RAM,
With DIGSI 5 V7.80, you cannot upgrade projects created with DIGSI 5 V6.20 and below directly to DIGSI 5 V7.80 due to the technical limitations. During the installation of DIGSI 5 V7.80, you will be prompted depending on the current DIGSI 5 installation on your PC. The following possibilities exist:
DIGSI 5 V6.20 and lower is installed on the PC : You are informed that it is required to install any one version from DIGSI 5 V7.00 to DIGSI 5 V7.50 (recommended) to upgrade projects to DIGSI 5 V7.80. This will uninstall the DIGSI 5 V6.20 and lower from the PC.
DIGSI 5 V7.00 or higher version up to DIGSI 5 V7.50 is installed on the PC: You are prompted that it is required to retain/remove the existing installation.
If the existing DIGSI 5 installation is retained, it is possible to upgrade the projects created with DIGSI 5 V6.20 and lower. In this case, 2 DIGSI 5 versions will be installed on the PC.
If the existing DIGSI 5 installation is not retained, only the latest DIGSI 5 V7.80 is installed. It is then not possible to upgrade the projects created with DIGSI 5 V6.20 and below.
DIGSI 5 V7.80 can be used along any available DIGSI 4 version on the same system. If you install DIGSI 4.82 or earlier after DIGSI 5, you need to reinstall the latest Automation License Manager (ALM) after installation of DIGSI 4. ALM setup is provided on the DIGSI 5 DVD in the folder \Automation License Manager.
DIGSI 5 is V7.80 fully compatible with older versions of SIPROTEC 5 device drivers.
Equipment reliability and availability are essential for all owners and users. At the same time, maintenance costs need to be kept to a minimum. The liberalization of energy markets presents new challenges to all; maintaining and enhancing competitive strength are among today’s most important business goals. Investment in technical plants and human resources enables these goals to be realized. Innovations in the technical field confront the users with the need of establishing, maintaining and extending their qualification and know-how. Our training programs are tailored to meet your specific needs. With our know-how, we can help you to keep ahead. Our training centers offer training programs comprising an extensive range of courses covering all the important aspects of numerical protective relaying. Choosing our courses will simplify your planning and ensure you of high-quality professional instruction at a reasonable cost. It is also possible to arrange training on your own premises thereby reducing costs for group participation. We will jointly plan a complete training program that matches your business goals and your particular working context.
SIPROTEC 5 and DIGSI 5 Training
By : Dr. Saeed Roostaee
The material of SIPROTEC 5 and DIGSI 5 course is designed to help you to be a professional in this filed.
Nothing beats hands-on learning from an engaging instructor who gives you the information you need.
The training course can take place at your company and the onus of transportation and accommodation lies with your company.
Thirty hours of training will be provided for the SIPROTEC 5 and DIGSI 5
More information and reservation, please Contact us.
DIGSI 5 is the configuration and operation tool for all SIPROTEC 5 Protection relays. With DIGSI 5, you create system topologies, configure hardware and communication networks, set function settings and perform many further tasks.
You perform all configuration tasks offline from your PC without the need for a SIPROTEC 5 device. You transmit all data online to the SIPROTEC 5 device later on – for example, directly through a communication network. For communication, DIGSI 5 and SIPROTEC 5 are based on current standards such as IEC 61850 and proven technologies such as Ethernet. There are 3 different variants of DIGSI 5:
For simple applications using individual SIPROTEC 5 devices, select DIGSI 5 Compact. With this variant, you deal with most standard tasks such as setting parameters or reading out process data. In addition, this variant also includes the CFC editor and the DIGSI 5 test suite for testing SIPROTEC 5 devices and functions. CFC offline and online debugging is supported to verify the created logic before downloading it to the device.
The DIGSI 5 Standard variant has an extended scope of functions. This variant includes, among others, a display editor which you can now also use to create your own symbols. With DIGSI 5 Standard, you simulate the topology of a system as a 1- phase representation and you configure hardware and networks on agraphical basis. DIGSI 5 Standard offers full IEC 61850 support, including system configuration.
DIGSI 5 Premium is the high-end variant of DIGSI 5. You analyze fault records with SIGRA and you use the advantages of flexible engineering and functional naming for IEC 61850. You will find a detailed overview of the features of the 3 variants in the Help topic entitled Features of the Different DIGSI 5 Variants.
Training on DIGSI 4 and DIGSI 5 Training, contact us